
ALT Continuous blood pressure (BP) monitoring could improve hypertension management by capturing changes that intermittent cuff measurements miss. Photoplethysmography (PPG) is widely explored for cuffless BP estimation because optical sensors are inexpensive, wearable, and already present in many consumer and clinical devices. PPG, however, does not measure arterial pressure: BP is inferred from waveform characteristics or pulse timing, which also depend on vascular tone, arterial stiffness, sensor contact, motion, and individual physiology. This survey reviews PPG-based cuffless BP estimation along the full measurement chain, covering physiological mechanisms, waveform features, pulse arrival time (PAT), pulse transit time (PTT), machine-learning methods, datasets, calibration, validation, deployment, bias, and clinical translation. Studies are assessed by the strength of evidence they provide rather than by reported error alone, with particular attention to subject and temporal leakage,

ALT During transitions from hospital to home, older adults are frequently affected by fragmented communication, limited coordination between levels of care, and insufficient post-discharge follow-up. Digital technologies, including remote patient monitoring (RPM), digital communication, and artificial intelligence (AI), offer opportunities to improve continuity of care. However, their integration needs to reflect the organizational and clinical contexts of different healthcare systems. This study presents the development and early implementation of digitally supported transitional care pathways within the TransCare project. Care pathways were analyzed and redesigned across three pilot sites in Italy, Romania, and Norway. Existing clinical and organizational processes were mapped to identify challenges and opportunities for improvement. Technology-augmented pathway matrices were developed to integrate RPM, digital communication tools, and AI-supported analytics across the stages of assessme

ALT Bayesian inference weighs competing explanations of noisy data by sampling from a posterior distribution, a task that deterministic hardware performs only by simulating randomness. Probabilistic bits (p-bits) supply this randomness physically, but the few hardware networks of p-bits built so far use inorganic devices, address optimization or learning, and are judged without reference to the spread expected from finite sampling. Here we report a probabilistic computer built from solution-processed conjugated-polymer memristors. Four polymer p-bits, tracked online for drift and coupled in a closed Gibbs-sampling loop, sample competing, degenerate and cooperative posteriors over sixteen states with statistics that fall within the range of ideal p-bits, both in their distribution and in their autocorrelation, without any parameter fitted to the target. This agreement extends to new simulated sensor readings whose outcome was predicted before each run, including readings that point away fro

ALT Magnetic Drug Targeting (MDT) is an emerging therapeutic concept in cancer medicine, where superparamagnetic iron oxide nanoparticles (SPIONs) are used as carriers for medication. Their magnetic properties allow for the manipulation of particle transport within the vascular structure and thus targeted delivery to the tumor site. To develop effective concepts for particle steering and accumulation, a detailed understanding of the particleβflow interaction, especially at asymmetric vascular bifurcations, is needed. Based on hierarchical scaling laws, generalized bifurcation geometries with varying degrees of asymmetry were derived and additively manufactured. The particle distribution was investigated by in situ optical measurements under different flow conditions and magnetic field configurations and compared with Lagrangian particle and Volume of Fluid Simulations (VoFS). While the particle mass partition followed the hydraulic flow split in asymmetric bifurcations, density-driven stra

ALT Virtual Reality (VR) presents a com pelling opportunity to transform STEM pedagogy; however, empirical evidence evaluating AI-driven adaptivity, objective engagement metrics, and long-term knowledge retention remains sparse. This paper proposes and evaluates an AI-adaptive VR based solar system learning module deployed on Meta Quest 2, wherein a machine learning model dynamically adjusts in structional difficulty based on real-time learner interaction logs including dwell time, gaze patterns, and response latency. A controlled between-subjects experiment was conducted involving 120 secondary school students (mean age 14.3 years) across three schools in India, randomly assigned to three conditions: AI adaptive VR, standard VR, and traditional classroom instruction. Engagement was measured objectively through eye-tracking fixation density and heart rate variability (HRV), alongside pre-test, immediate post-test, and delayed post-tests at one week and one month intervals. Statistical anal

ALT This paper presents a GPS-triggered geofencing and enforcement scheme that integrates real-time satellite positioning with Software-Defined Radio (SDR) based RF jamming to detect and neutralize unauthorized unmanned aerial vehicle (UAV) boundary violations. Conventional geofencing depends on onboard GPS and cooperative flight firmware. The proposed approach instead moves enforcement to a ground base station, so the response does not depend on the UAV. An ESP32- WROOM-32 microcontroller paired with a u-blox NEO-6M GPS receiver streams telemetry over Wi-Fi to a Python/GNU Radio base station. There, a lightweight Haversine boundary-violation algorithm computes the great-circle distance between the UAV and the geofence. This distance drives a piecewise-linear adaptive speed and altitude control law. The law progressively decelerates and descends the UAV inside a 1 km warning zone and brings it to a complete halt at the boundary. If the boundary is breached, a HackRF One SDR escalates to ba

ALT Artificial intelligence for power electronics is evolving toward a deeper comprehension of system intrinsic behaviors and dynamics. As a novel integration of neural computation and electric circuits, spike-based neuromorphic computing offers promising potential in high energy efficiency and adaptability for data-driven applications. Building on the latency-coding principles, this article proposes a framework for data-light condition monitoring that relies solely on three-phase AC current measurements. The AC current signals are encoded as membrane potentials of RC-based spiking neurons, which are inherently compatible with spiking neural networks that can effectively facilitate the estimation of device parameters. Case studies are presented to validate the performances, while constraints and further optimizations are also evaluated and discussed, and future extensions of the methodology are provided.

ALT Due to susceptibility to radiation-induced soft errors and resource constraints implementing large and complex designs on field programmable gate arrays (FPGAs) in harsh environments is challenging. Therefore, to mitigate these issues, this paper proposes an innovative approach through the introduction of a single event upset (SEU)-hardened spintronic FPGA architecture that incorporates multi-context capabilities. Leveraging the non-volatile properties of magnetic tunnel junction (MTJ), the proposed design can store two/four distinct configurations internally, eliminating the dependence on external non-volatile memory which significantly boosts the system performance. Additionally, through post-layout simulation, we demonstrate our design immunity to SEU, which enhances its reliability and operational stability in environments susceptible to radiation-induced soft errors. The efficiency of the proposed design was also evaluated using the ROSSETA benchmark, which serves as a representat

ALT In-sensor processing (ISP) is used in various fields, including autonomous driving automotive systems, wearable healthcare devices, environmental monitoring, wireless sensor networks, smart cities, and industrial control systems. One of the main features of most of these applications is energy and hardware restriction. This restriction amplifies the importance of using high-performance and low-energy consumption computing systems and methods. This paper proposes efficient spintronic stochastic computing modules for in-sensor computing systems to address this challenge. The proposed design utilized the stochastic behavior of the magnetic tunnel junction in the subcritical switching regime to generate a probability-adjustable random stream. Probability-adjustable random stream generation is the most important step in any stochastic system because it determines the quality of the final output. The simulation results indicate that the proposed design offers almost the same peak signal-to-n

ALT Hybrid quantum-classical annealing solvers are moving from research laboratories toward industrial use, but their advantage over classical optimization appears to be confined to a narrow class of problems. A recent systematic benchmark of the D-Wave hybrid solver against industry-leading classical solvers, across several classes of optimization problems, found it to be most competitive on binary quadratic programs, while noting that few industrial problems take this form. Therefore, identifying real-world industrial problems that can be modeled with this structure is a key challenge. We propose protein side-chain optimization, a core step of computational protein design, as one of these problems: it is natively a binary quadratic program, and its application context requires pools of low-energy solutions, which annealers naturally return. In this feasibility study, we test whether the competitiveness of the hybrid solver against industry-leading classical solvers extends to this proble

ALT Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering 30% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0.05-0.1 dB/km), and nonlinearities reduced by three to four orders of magnitude. While the physical-layer benefits of HCF have been extensively demonstrated, recent industrial commitments by hyperscalers (e.g., Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call for a systematic assessment of the impact of HCF at the network level. Building on a series of prior contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energy-efficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission; and (iv) coexistence of classical and quantum (QKD) channels. Consolidate

ALT Muscle stiffness is a physiologically meaningful biomarker associated with a wide range of musculoskeletal and neurological conditions. However, existing muscle stiffness assessment methods, such as shear wave elastography (SWE), manual palpation, and handheld mechanical probes, remain impractical for continuous, everyday monitoring due to bulky hardware, operator dependence, and limited self-use. Meanwhile, wearable muscle-sensing modalities such as Electromyography (EMG) and Mechanomyography (MMG) primarily capture muscle activation rather than passive mechanical properties of tissue at rest, leaving a critical gap in portable monitoring of resting muscle stiffness. In this work, we present WAVES, a wearable system for continuous monitoring of muscle stiffness via active vibroacoustic sensing. WAVES injects controlled vibroacoustic excitation into soft tissue and estimates muscle stiffness by measuring shear-wave propagation velocity through Time-Difference-of-Arrival (TDoA) analysis

ALT We propose an algorithm that can synthesize circuits to gate sets consisting of a 2n-arity Clifford gate and arbitrary single qubit rotations. To do this, we represent the circuit as a sequence of Pauli gadgets and jointly synthesize them by placing the multi-qubit Clifford in the synthesized circuit and pushing its adjoint through the remaining gadgets such that some qubits are disconnected from some gadgets. The pushed gadgets are collected in a Clifford tableau, which is decomposed afterwards. With the help of our algorithm we run experiments where we synthesize circuits to varying sizes of target multi-qubit gates. These experiments indicate that increases in gate size can lead to smaller output circuits, and that different connectivity constraints have meaningful differences in how higher arity gates effect the circuit sized.

ALT Prototyping and early-stage circuit evaluation for emerging transistor technologies require fast and accurate compact models for SPICE simulations. Standard physics-based compact models, such as BSIM, offer high fidelity but demand extensive domain expertise and time-consuming equation formulation for every new physical effect, significantly slowing technology development. Neural network (NN)-based models offer a scalable alternative approach, but they rely heavily on smooth numerical solver data with explicit high-order derivative information. However, measurement data suffers from complex noise patterns, making derivative extraction challenging and complicating NN-based transistor modeling. This work presents a derivative-free NN training framework employing spectral normalization to naturally smooth derivative behavior and filter measurement noise. Using drain current measurements from a fabricated 28 nm ferroelectric device, we design an NN-based compact model that captures the ful

ALT Many neuromorphic systems possess rich internal computational structures shaped by their physical dynamics. However, existing metrics characterize only global computation, leaving these local structures unresolved despite their importance for system interpretation, optimization and miniaturization. Here, we introduce local information processing capacity (L-IPC), which represents individual dynamical states as vectors in an infinite-dimensional Hilbert space and decomposes their computational properties through subspace projections onto nonlinearity orders and memory steps, with the residual quantifying computational irrelevance. Applied to three systems with comparable global capacities (an echo state network, an ion-gating reservoir and a spin-wave reservoir), L-IPC reveals markedly different distributions of computation, ranging from homogeneous to spatially, temporally and spectrally structured patterns. These local profiles further guide task-specific pruning, outperforming standa

ALT Rapid Single Flux Quantum (RSFQ) logic can operate at ultra-high clock frequencies; however, its physical design is complicated by explicit splitter trees and deep gate-level pipelines in which every logic gate is clocked. To address this challenge, we present qLevelPlace, a level-based placement framework for RSFQ circuits. We separate gate and splitter placement into two stages to better support levelguided gate-to-row assignment and use a timing-aware quadratic cost function to penalize long interconnects. Experiments on the benchmark circuits show that, on average, qLevelPlace achieves a 2.65Γ higher clock frequency and a 51% reduction in layout area compared with the state-of-the-art RSFQ placer qPlace.

ALT Future molecular communication (MC) networks are envisioned to use the human cardiovascular system as a channel. Disease-related changes affect particle transport, allowing an MC receiver to also act as a sensor. In this work, we investigate plaque formation in a carotid bifurcation through a systematic fluid-dynamics simulation study with non-Newtonian blood rheology. We analyze how plaque geometry changes branch-specific particle reception and timing, and use these observations to estimate plaque-induced channel obstruction. At an illustrative reference of only 128 emitted particles, a 250 ms observation window and 50 ms temporal resolution, a Ridge detector estimates maximum local channel-width reduction with a mean absolute error of 8.30 percentage points. We evaluate robustness across system constraints like particle budgets, observation windows, branch access, detection efficiency, count resolution, and synchronization. Coarse counting has little effect when timing features remai

ALT Morphogenesis of diatom silica shells involves a sequence of topological transitions: initially separate ribs grow and branch, then merge through bridges, leaving a regular network of pores. Existing models based on diffusion-limited aggregation or reaction-diffusion reproduce either branching or pore formation, but not both within a single framework. Here we propose a two-stage model of diffusion-driven morphogenesis with evolving connectivity. The model is formulated on a fixed finite element mesh with a density field on an active layer. Stage 1 reproduces dendritic growth, where a stimulus based on the local diffusive flux exceeds a threshold. Stage 2 uses an inverted stimulus, where high local flux suppresses precipitation, stabilizing pores between the dendrites. The update rules are analogous to sensitivity in density-based topology optimization and to strain energy density in bone remodeling. The model predicts distinct morphological regimes on each stage, controlled by the resp

ALT The electronic structure of molecules is foundational for scientific advancement, however determining it remains challenging due to the growth of the molecular Hilbert space with system size. Recent approaches address this by using quantum circuits to sample candidate configurations and sample-based quantum diagonalization (SQD) to compute the ground state. We propose ZenKO, a novel gradient-based, iterative SQD method that employs a hybrid quantum-classical approach. ZenKO decomposes configuration selection into discovery, validation, and refinement, enabling targeted subspace expansion and guided exploration. Our evaluation demonstrates that, across HβO, Hββ, and Nβ molecules, ZenKO improves ground-state accuracy compared to prior iterative methods, while significantly reducing classical cost.

ALT The increasing diversity and computational demands of automotive edge functions require hardware architectures that support heterogeneous processing while limiting implementation complexity and system overhead. We investigate a system-level approach in which a common, fixed photonic front end provides a shared physical transformation for multiple processing functions, while application adaptation is handled by lightweight peripheral processing. We propose the Versatile Photonic Encoding Platform (VPEP), implemented using a fabricated silicon-photonic chip with 32 phase-modulated inputs, a passive fixed encoding core, and 17 on-chip photodetector outputs. Without reconfiguring the photonic core, the same chip is evaluated across four representative functions relevant to automotive edge systems: classification and regression for machine learning, analog-to-digital conversion for mixed-signal processing, and photonic information encoding and recovery for communication-related processing.
