Aconit Project 🇪🇺 (@ACONITProject) header
Aconit Project 🇪🇺 (@ACONITProject) profile picture

aims to design, manufacture & test actuators for flow control for an implantation in an aircraft engine. @cleansky_ju @EU_H2020 🇪🇺

Paris-Lille-Munich-Grenoble
Joined July 2020
Aren't you curious to understand what the purpose of this project really is❓  If so, then watch this animation! 🔥 Everything will be much clearer! 👌  Thanks to @CedraTec Technologies for the video.  @ArtsetMetiers_ @unibw_m @onera_fr #Cleansky #H2020 #Flowcontrol
1
2
2
1,800
Fresh news from ACONIT side ! 🔥 The project is going well and all the partners are working ❗ The physical meeting of the project planned in November, in Munich, has been cancelled ☹, but the consortium will be brought together as soon as the covid situation allow it !
1
2
📣The #simulation video has arrived❗ ⚠After 2️⃣2️⃣5️⃣ 0️⃣0️⃣0️⃣ hours of calculation spread over 512 CPUs of @onera_fr - The French Aerospace Lab's computer, the equivalent of 20 days of non-stop calculations ❗ these are quite unusual and particularly heavy simulations⚠
1
1
📣 As promised, fresh news ❗📣 While @ArtsetMetiers_ is finishing its test campaign on a real test bench, @onera_fr is doing simulations to analyse the behaviour of the flows ❗ @cleansky_ju #cleansky #H2020 @unibw_m @CedraTec
1
3
1
6
🛠️ The testing campaign is still running at @ArtsetMetiers_ ! Here the PIV measurements in an axial compressor ✅ with and ❌ without active flow control. Results are coming soon ❕ ❗
1
2
1
5
🛠The PIV test campaign is in progress at @ArtsetMetiers_ Some 📷pictures of the work carried on in the GIF below ⬇️ 🔜The results will come in the next few weeks ❗️ @EU_H2020 @cleansky_ju @CedraTec @unibw_m @onera_fr
1
3
1
3
A challenging experimental campaign: Particle Image Velocimetry (PIV) in the CME2 axial compressor, close to stall condition. PIV campaign is in preparation at @ArtsetMetiers_ , with the technical support of @onera_fr , and will be held in March and April. #H2020 #CleanSky
1
3
Computational Fluid Dynamics of the low-speed subsonic compressor CME2: unsteady simulation from stabilized to stalled operating point with elsA software by @onera_fr . Tip leakage flow is responsible for the rotor stall onset.
2
8 months after the ACONIT project was officially launched, the consortium met again, for the first periodic meeting. Despite the current difficulties, the dynamics of all the partners is still strong! Safran Aircraft Engine was present at this meeting as an Advisory Board.
Computational Fluid Dynamics of a Fluid Actuators: @ArtsetMetiers_ as achieved a numerical campaign aiming at simulating the flow in a fluidic, Coandă effect, actuator (in pulsed or continuous blowing) and in the boundary layer in which it is blowing.
1
5