CAM CILER. retweeted
The countdown to @SHINE_Ibiza x @ritvales has started... Colombia, ¡tengo muchas ganas de verlos!
CAM CILER. retweeted
✨ RITVALES X SHINE ✨ COLOMBIA 🤝 IBIZA
It's a great pleasure to announce the @SHINE_Ibiza arena at one of my favourite festivals world wide - RITVALES in Medellin, Colombia! I'm bringing @alyandfila @AntoineClamaran b2b @J8man, @djciaranmcauley, @KamiloSanclemen, @MauroPicottoDJ and Kashwell b2b Servel to Parque Norte October 31st.
web.tuboleta.com/images/Even…
CAM CILER. retweeted
The key to a happy life is moments like this!
You're next, Colombia! @ritvales @SHINE_Ibiza
CAM CILER. retweeted
Mastering advice.
It's okay to exaggerate the punch before the limiter, because the limiter often reduces the punch.
Unless your limiter falls into gain reduction drastically and it sounds weird, you can add some additional punch before to keep the desired sound.
CAM CILER. retweeted
🎚️ Sound as architecture. New way to look at your mixes.
A good mix is like good architecture. A building needs a solid foundation, strong walls, and windows that let in just the right amount of light. The same applies to music: the low end provides weight and stability, the midrange carries the content and emotion, and the highs bring clarity and air. If any one of these elements is out of balance, the whole structure feels wrong. Thinking about mixing in this architectural way can help you understand not just what to adjust, but why.
The foundation of a track lives in the low end, usually the kick and bass. If it’s too heavy or muddy, the whole mix leans and collapses. If it’s too weak, the music doesn’t stand on the ground. One way to test this is to listen at very low volume: if the bass disappears completely, it’s probably too focused on sub frequencies that won’t translate. If your ears start to buzz or fatigue at normal levels, you’re carrying too much weight in the subs. The fix is rarely about boosting more; it’s usually about shaping. Rolling off everything below 30–40 Hz removes energy the listener can’t hear but still clutters the mix. Adding a touch of saturation around 150–300 Hz helps the bass be heard. I had a whole article about bass translating to small speakers a few days ago. The goal isn’t just big low end, but a foundation that supports the rest of the «building».
The walls of the mix are in the midrange — vocals, guitars, synths, snares — everything that tells the story. This is where the listener connects with lyrics, chords, and melodies. If the midrange is overcrowded, the mix feels boxy and chaotic; if it’s hollow, the music lacks life. A simple test: mute the vocals. If the track still feels recognizable and coherent, your walls are solid. If the song falls apart, then the midrange isn’t carrying its share of the structure. Practically, you might carve a little space around 1–3 kHz for the vocal by dipping guitars or synths, or control the buildup in the 200–400 Hz area that often makes mixes muddy. The principle is simple: the walls should be strong, but not so thick that they block everything else.
High frequencies are the windows and the light. They give the mix sparkle, detail, and a sense of air. But too much light blinds you; too little leaves everything dull. To check balance, listen at both quiet and loud levels. If the mix sounds lifeless at low volume, you probably need more highs. If it feels piercing at high volume, you’ve overdone it. The trick is small, deliberate touches: a gentle shelf boost at 12–16 kHz on vocals to add breath, or a slight lift around 8–10 kHz for hi-hats so they shimmer (I love to combine it with 4-5 kHz dip). Keep in mind that brightness works best when supported by strong mids and lows — light means nothing without a structure to illuminate.
Reverb and space act as the architecture of the room itself — the way you design the space around your instruments. Like a building’s interior, reverb adds dimension and depth, but too much makes the mix sound flooded and unfocused. A good test is to turn the reverbs off entirely. If the track sounds dry but still clear, you’re in a good place. If everything falls apart, you’re relying on reverb to cover weak construction. In practice, short reverbs of around one second can glue elements together, while longer reverbs of two to three seconds should be used sparingly for atmosphere, perhaps on pads or background vocals. Always cut the low end out of reverbs — below 200–400 Hz — to avoid muddying your foundation. I usually do it on a reverb bus, for all reverbs at once.
Ultimately, a mix stands or falls by its balance. Too much low end, and the foundation smothers the walls and windows. Too much midrange, and the building feels cramped. Too much top end, and it’s dazzling but fragile. To check balance, compare your track at different volumes, in mono, and against a reference mix. A well-built mix will still feel solid even when played quietly through a small speaker. That’s the true test of structural integrity.
Thinking about sound as architecture gives you a new lens for mixing. Instead of asking only “does this kick sound good?” you can ask “does this kick strengthen the foundation, or is it shaking the whole building?” Mixing becomes less about isolated tracks and more about construction. With a strong foundation, solid walls, and the right amount of light, your mix won’t just sound balanced — it will stand tall.
@natemixing
CAM CILER. retweeted
🎚️ What compressors should do?
Sounds after compression should gain better dynamics and possibly more interesting color, if your compressor colors the sound.
You shouldn’t hear “the effect” of compressor.
If it doesn’t sound natural, if it sounds with “effect”, you overcompressed the audio. And if it wasn’t the goal, fix it.
And that's why many people don't hear compression. They want to listen the obvious changes in sound. They want it to sound more processed and obviously different. When in reality good compression just shapes the dynamic range and works only on peaks, retaining the same dynamics on most part of the signal. Pay attention to volume fluctuations, how louder parts, especially transients, even words or letters on vocals sound after compression. May be quieter sounds became more prominent. May be the sound became more consistently. May be it sounds closer or farther now. May be the groove of your instrument or vocals fits the song better now, or worse. There are too many aspects that compression affects and it's not related to how processed the sound is. It can remain natural but with subtle changes in dynamics, which affects how the sound perceives.
@natemixing
CAM CILER. retweeted
Antares sigue ampliando su ya extenso catálogo de plugins con AutoTune 2026 y AutoTune Metamorph. Dos enfoques distintos, pero complementarios, que refuerzan la posición de la marca como líder en procesamiento vocal.
hispasonic.com/noticias/auto…
CAM CILER. retweeted
🎚️ Tape saturation on the master.
One of my favorite tricks during mastering is to add tape saturation to your whole song. By adding a controlled amount of tape saturation during mastering, you can give your music a rich character and glue the mix together better.
This technique can be subtle but can significantly enhance the warmth and depth of your tracks. It makes your masters "bigger" and adds that finished touch.
There are many good tape saturation plugins on the market. From UAD, Waves, Softube, Slate Digital etc.
Find what works for you the best. My favorite tape now is UAD Ampex ATR-102.
@natemixing
CAM CILER. retweeted
🎚️ Why mixes distort without clipping.
“My mix sounds muddy and distorted - but none of my tracks are clipping. What the hell is wrong?”
If that sounds familiar, you’re not alone - and the answer might be hidden in the most overlooked skill of modern production: gain staging. Let’s find out why.
In 2025, most producers work entirely in-the-box, inside powerful DAWs with 32-bit float engines and meters that go green all the way down to -INF. So why should you still care about something as “old school” as gain staging?
Because the clarity, punch, and depth of your mix depend on it.
Gain staging isn’t about obeying old analog rules - it’s about feeding your plugins the levels they expect, avoiding unintentional saturation, and building a mix that sounds tight at any volume.
Let’s break it down.
Back in the analog days, gain staging was critical: too low, and you’d get hiss and noise; too hot, and you’d overload your gear. Engineers aimed for a sweet spot around 0 VU, which translated to roughly -18 dBFS RMS in today’s digital world.
But in a DAW, especially with 32-bit floating-point audio, we have massive headroom and no danger of clipping the internal engine. So… do we still need gain staging?
Yes. And here’s why.
Modern DAWs won’t clip internally - but your plugins absolutely can. Analog-modeled compressors, EQs, saturators, even some reverbs are sensitive to input level. Overloading them kills tone, dynamics, and space. A poorly staged gain flow causes unintentional distortion, masking details and eating up headroom, meaning the song's further loudness potential. Over time, compounding gain boosts across tracks and plugins build up and crush your master bus - even if everything “looks fine” on meters.
In other words: gain staging isn’t about preventing clipping - it’s about control.
Here’s where to pay attention:
1. Input Recording Stage
•Avoid recording too hot: aim for peaks around -12 to -9 dBFS, especially for vocals and instruments.
•Stay consistent across takes.
2. Between Plugins
•Check input/output levels across insert chains - don’t let one plugin boost 10 dB without reason.
•Many plugins (e.g., CLA compressors, UAD stuff, analog models) expect levels around -18 dBFS RMS to behave properly. This is intentionally designed to simulate hardware’s behavior.
3. Track-to-Track Balance
•Normalize your audio clips, samples, and VST instruments to a healthy level before processing.
•Don’t rely on the fader for gain correction - that’s for mix balance, not staging.
I usually change the gain on the audio clips themself.
4. Bus and Master Levels
•Keep group buses under control: treat them as “submixes.”
• Before getting into processing, leave at least -6 dB of headroom on your master bus. You will just have more freedom during further job and not accidentally clip the signal. You shouldn’t think about that when you are in creative mode.
Common Gain Staging Mistakes:
1. Over-gain: Every plugin adds a few dB, stacking until the mix distorts.
2. Under-gain: Feeding compressors too weak a signal - they don’t engage properly.
3. Ignoring plugin meters: Many show when they’re being overfed, but producers skip them.
4. “It sounds better louder” bias: Louder ≠ better. Compare before/after at the same loudness to understand if it really became better.
Gain staging isn’t just theory. It’s the hidden foundation of every mix that sounds great and not falling apart.
@natemixing
CAM CILER. retweeted
Add Bluetooth to your 30 year old minidisc player github.com/formatc1702/bluet…
CAM CILER. retweeted
🎚️ When group compression is better?
It’s easy to assume the best way to control dynamics is to compress every track on its own.
Keep the kick in line, tame the snare, control the toms, level the hi-hats — one compressor per sound. But often the opposite approach works better: one compressor on the bus can glue the group in a way that no amount of individual control ever will. It’s one of the paradoxes of mixing — less processing on the parts can mean more impact in the whole.
The reason bus compression feels different is because it reacts to the group as a single instrument. When multiple sounds hit together, their peaks interact, and the compressor responds to the collective energy. That shared movement creates a sense of “glue” the human ear instantly recognizes. We don’t naturally hear isolated tracks in music — we hear ensembles, sections, and the total flow of energy. A bus compressor leans into that reality.
Take drums. You could spend forever balancing dynamics track by track, but put the whole kit through a bus compressor and suddenly it breathes like one machine. The kick makes the snare dip just slightly, toms roll into the groove, and cymbals move in sync with the kit. On background vocals, bus compression turns a group of voices into a single choir, smoothing out tone and phrasing differences. Even layers of guitars or synths benefit — with light compression on their bus, they stop feeling like separate takes stacked together and start acting like one wide, unified sound.
The key is subtlety. Bus compression isn’t about crushing, it’s about guiding. Ratios stay low, usually between 1.5:1 and 3:1, so the compressor works gently. The attack is set slower — 10 to 30 ms — letting transients punch through before the clamp. The release is tuned to the tempo of the song so the compressor lets go in rhythm, not against it. If you use SSL G Bus compressor, usually the release is being set to 100 ms. And gain reduction shouldn’t be heavy — 1 to 3 dB on peaks is often all it takes to bring cohesion. Done right, the effect is less about “hearing compression” and more about feeling that the group has locked into place.
There are pitfalls. If every track in the group is already over-compressed, the bus compressor has nothing left to shape, and the result is lifeless. If you hit the bus too hard, the entire section flattens, and you lose the very dynamics that make bus compression exciting. The trick is to leave some air in the individual tracks so the bus can “work” naturally. Think of it as saving headroom for the compressor to sculpt the overall picture.
Bus compression is less about micro-management and more about energy. Instead of chasing every peak individually, you let the compressor react to the sum and bring order to the chaos. That’s why sometimes the most alive, powerful mixes don’t come from a hundred small compressors on every track — they come from one overloaded bus, working subtly but decisively, holding the whole performance together.
🏆 Resources for students:
• Checklist on how to know when your bus compression sounds right.
• Presets for mix bus, drum bus, vocal bus and instrument bus compression.
• My own technique on utilizing sidechain HPF for perfect cohesion.
@natemixing
CAM CILER. retweeted
Etar — Ultraviolet
Trance
Electric Eden Records #EER532
08.03.2024
BeatPort.com/release/-/44614…
JunoDownload.com/products/65…
Music.Apple.com/album/173213…
We are excited to unveil the latest release under the Electric Eden Records label. Originating from Switzerland, the
Trance.One/?34156
CAM CILER. retweeted
🎚️ Rule #1 when mixing
Vocals, guitars, drums, piano, any sound you work with. Don’t forget please that perfect mixing is no mixing!
You shouldn’t mix anything because it has no plugins on the channel. It's not a reason to throw a plugin on the track.
Ask yourself:
• What am I trying to do?
• What sound I am trying to achieve?
• What problems I’m trying to solve?
If it doesn't need a plugin, it's perfect. It's not bad. It's not because you are bad engineer and don't know what to add. It doesn't matter on which level of engineering you are, you have to trust yourself. There is no other way to get the best results that you possibly can. If you think it's good as it is, then leave it.
Therefore, every plugin you add should serve a goal that you set and the goal CANNOT BE "to make it sound good". Forget the word "good" in this context. How exactly you want it to sound? Big? Small? Close? Far? Wide? Narrow? Bright? Dark? Soft? Aggressive? Every move you make should get your sound closer to what you want, not to an abstract "goodness". It will sound good when you have a purpose and do things consciously.
After you added a bunch of plugins bypass them all at once. Does it sound better without plugins at something? At the slightest thing? Does it feel better? More natural?
Now turn on plugins. Has any useful information gone? Does it sound thiner and lifeless?
THE ANSWER WILL BE YES IN A LOT OF CASES!!
Now bypass all the plugins again. Turn them on by one, try to understand on which step you choked the sound and it became less natural.
In most cases it’s EQ, sometimes it’s overcompressing, it might be both. Or something else you did.
Revise your chain keeping in mind that you have to KEEP all the positive qualities of your initial sound.
Trust me any pro does this, and I do this.
And I catch myself overprocessing time to time.
Sometimes it's hard to keep the positive qualities while getting rid of the bad things during mixing. It can become almost impossible at the mixing stage. That's why achieving the best possible source is so important and that's why I strongly recommend to polish your source as much as possible before mixing. I recently posted a whole lecture inside the vocal mixing course on why is that important and how it affects the final result. It's HUGE.
@natemixing
CAM CILER. retweeted
LOST UK — Let It Go
Uplifting Trance
Electric Eden Records #EER683
26.07.2024
BeatPort.com/release/-/46474…
JunoDownload.com/products/66…
LOST UK, hailing from the United Kingdom, releases his latest single "Let It Go" under Electric Eden Records. This track expertly
Trance.One/?36645
CAM CILER. retweeted
Top 10 Mastering Tips
1. Start with a Well-Mixed Track
Mastering cannot fix a poor mix. Ensure your mix is balanced, with proper EQ, dynamics, and stereo imaging before mastering.
























