***Mid-Week Macro***
This test piece has gone through Macroscopic Examination in accordance with ISO 5817 Category B.
Do you think this is acceptable or unacceptable to the requirements of category B?
Comment below with your answer…
ow.ly/rewP50DVeA1
1
This welder is carrying out a Single Bevel Butt Weld in Carbon Steel using MAG. If the Butt Weld is satisfactory to the requirements, the company will have a qualified Procedure to ISO 15614-1 and the welder will have gained Welder Approval to ISO 9606-1!
codeaweld.com/
#FridayFreature Gary Smith - known for creating epic welding art made out of cutlery. As the saying goes - one person’s trash is another person’s treasure.
View Gary's work here: ow.ly/3WKT50DPU43
Send you photos and info to [email protected]
codeaweld.com/
*Macro of the Week*
This Fillet Weld in 6mm Carbon Steel Plate failed to meet the requirements when examined in accordance with 4872.
Can you tell us the reason for the failure?
lnkd.in/dMKG6UN
1
We are delighted to announce the return of SkillWeld 2021 which is designed to test your skills in the three main Welding processes: Manual Metal Arc, Metal Active Gas & Tungston Inert Gas. Register your interest TODAY ow.ly/ZuoJ50DNDYR
*Photo taken pre COVID-19
This welder is carrying out a Multi Run, Single ‘V’ Butt Weld in Plate Procedure in the Horizontal (PC) position using MAG. For more information on the range of services we offer at Code A Weld, please call 01761 410410 or go to codeaweld.com/
1
#FridayFeature sent in by Joel Broddle at @gifhe. This shot is from their inter-college competition between @gifhe & @RotherhamColl. Here is a year 1, level 2 learner completing their test piece - 10mm, PB FW, using MMA 6013 rods.
Send your welding photos to [email protected]
2
***Technical Question***
Have a read of the following quiz question and place your answer in the comments section below…
We hope you are having a good week so far and if you would like to find out more about Code A Weld go to: ow.ly/IIHH50DIsl9
#welding #codeaweld
2
1
Would you like to feature on the Code A Weld news feed as part of our #FridayFeature series? Send us details & a photo of what you are welding to [email protected] & we will select the best ones to feature on our page with credit to you & your company!
codeaweld.com/
2
*Technical Question*
Have a read of the following quiz question and place your answer in the comments section below…
For more information about the range of services we offer at Code A Weld, please call 01761 410410 or go to: codeaweld.com/services/
#welding #codeaweld
2
This is a rear view of a Butt Weld in the PC position with a welding process of 135. Once delivered to our In-house Laboratory and if satisfactory to the requirements, the manufacturing company will have a qualified procedure to ISO 15614-1.
ow.ly/XyKY50DxIN6












