Steve (@G4HTZ) header
Steve (@G4HTZ) profile picture

renovated 1950s Johnson Viking 2 valve TX ..and got a AR88 ..must be getting old I guess…… also recently got a IC 905 plus the 10ghz transverter

JO01IO98OK
Joined December 2013
Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)Photo by Steve (@G4HTZ)
ON0HVL Beacon 24ghz signal into Kent 24ghz SDR this morning about 09.15
1
8
183
10ghz slot waveguide
3
119
Came back to X as not much of interest on blue sky
6
117
Dragged the AR88 and the Johnson Viking 2 TX into the operating shack …hopefully finaly sorted the Viking fault …all needs wiring up for RX/TX switching now
7
170
Dug the AR88 out from the repair shack into operation shack …free hernia …works really well considering it’s 1940s …this is tuning the 6mhz band with a 7mhz dipole …lots of pirate music stations on
2
1
11
333
Been mounting a 350w 70cms ex surplus board onto a big heatsink …driving it with a portsdown 4 on DATV …unfortunately my 28v psu is only rated to 20 amps max…but it hits the 200w mark when driven just with Pluto and a SPF board @BATCOnline
4
58
2,526
After tests with G4BAO I was able to hear GB3CAM at S3 over another difficult path @G4BAO @UKGHZ
5
238
Doing some tests with G4BAO on 10ghz to set my dish up and prove RX was ok …surprising John was upto S9 at times over this path @g4bao @UKGHZ
10
401
A lovely 65th birthday card from my springer spaniel today
3
4
286
Mounted the 10ghz transverter on the mast to test the RX …no beacons heard ….so not sure if it’s working …trying for some A/S reflections on GB3PKT …but nothing so far …G4HTZ JO02GB52
1
4
270
23cms /1296mhz UKAC this evening from 20.00
1
4
241
Just installed a mast head pre amp for 1296mhz …can now receive GB3IDT a 300mw beacon which is currently only at 3m agl …69km away …still amazes me it can make it over this terrain .
12
341
Put up 2 ele delta loop for 10m …pointing to North America …works really well …been listening to USA 29mhz AM stations on AR88
2
27
953
At the age of 64 …I have finally made it into RADCOM with my old AM gear with a mention and picture in G3YPZ feature on AM @johnpetters @theRSGB
2
15
613
Lovely smell of dust burning off the valves on the AR88 after 1st switch on for about a year …still seems to work ok
1
1
12
424
203
3,838
171
14,737
332,415
Had a 60ft eucalyptus tree blocking the north west direction at new qth in the neighbouring garden …today 4 guys turned up and cut it down ..result !!
1
13
739