GeertjanCap (@Geertjancap) header
GeertjanCap (@Geertjancap) profile picture

Mechanical Engineer R&D heavy and semicon industry, interested in disruptive technologies and (macro) economics.

EU
Joined June 2011
Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)Photo by GeertjanCap (@Geertjancap)
The “Miners Multiple”: #Bitcoin Market Cap vs. the Sum of all Mining Rewards ($). Identifies bubbles & dips with high signal to noise ratio. Current value: 11. Was never below 1. More signal than the Mayer Multiple @TIPMayerMultple @PrestonPysh @TraceMayer (1/3)
8
66
6
319
GeertjanCap retweeted
This might be the craziest rocket video ever tbh
99
753
82
6,857
309,154
GeertjanCap retweeted
I see people trying to compare Space Shuttle reusability to Starship. The Shuttle’s external tank was discarded, but the Solid Rocket Boosters required extensive refurbishment. After splashdown, recovery ships towed the boosters back to Cape Canaveral. Crews washed off salt, separated the segments, and hydroblasted residual insulation. The bare steel cases were then shipped by rail to Utah, where they were cleaned to bare metal, inspected, and proof-tested. New insulation and propellant were installed, along with nozzles and igniters, and the finished segments returned to KSC for stacking and reuse. Steel cases were designed for about 20 reuses. This was not quite the reusability NASA originally envisioned for the Space Shuttle. Also why SLS does not attempt SRB recovery.
65
29
8
566
63,338
GeertjanCap retweeted
Yeah, I was going over the whole Starship heat shield earlier today. Overall, it looks great. The engines look great too. Ship 42 could probably be reflown with a few weeks of refurbishment. However, many small fixes are needed to achieve immediate reusability (like an airplane), which requires zero expected refurbishment, apart from scheduled maintenance.
Elon is up at the pad inspecting the ship. Road is closed and we're expecting a rollout soon!
3,256
9,935
547
99,282
5,019,462
Congrats to @elonmusk and the @SpaceX team! It was almost magic..Making more believers by the day....one step closer to 🌖🇺🇸
602
4,059
138
52,254
894,182
GeertjanCap retweeted
Mechazilla catches Starship! Congratulations to the entire SpaceX team on this incredible achievement!
6,798
27,317
9,091
140,975
17,197,117
GeertjanCap retweeted
THIS IS THE MOST EPIC VIDEO ON 𝕏 RIGHT NOW
507
6,686
455
33,221
1,108,493
GeertjanCap retweeted
After failing to get Jensen Huang and Nvidia, China went after Elon Musk But….
🤖 Made with AI
1,302
5,167
691
44,285
6,695,717
GeertjanCap retweeted
IF YOUR CHILD SAYS "I'M STUPID," DO THIS IMMEDIATELY. Not "no you're not." Not "don't say that." 1. Pause and get down to their eye level.
32
68
1
522
508,305
Insurance for this is possible but expensive. Once you have >6-7% illness insurance becomes prohibitive. --> a real problem
More Madness ... A Dutch company needs to pay a 'sick' worker for another two years. (In Germany, it is just 6 weeks) Even if he/she is sick for non-work-related reasons. It's a huge risk, so Dutch companies try to hire as few staff as possible ..
305
GeertjanCap retweeted
Nobody talks about the good parts of ADHD. The official ADHD checklist has 18 symptoms. Zero good parts. So here’s a few, right next to the symptom line they hide behind.⬇️
5
20
1
180
27,600
GeertjanCap retweeted
BREAKING: Scientists confirm that an ADHD brain can hyperfocus for 4 hours straight on a complex hobby—but will physically freeze for 3 days over a chore that takes 90 seconds to finish. Researchers baffled. ADHD community: "Yeah, we know." No clinical citation needed—every parent and kid staring at a pile of shoes by the door is the study. Here is why tiny tasks paralyze an ADHD brain, and how to trick yourself (or your kid) into starting.1/6
92
726
45
7,035
489,413
GeertjanCap retweeted
One of my favorite shows as a kid!
Elon Musk just made Turbo Boost a reality. A bunch of guys my age have been waiting our whole lives for this.
5,870
13,926
996
140,955
5,463,657
GeertjanCap retweeted
Thanks to Elon, we just watched a Roadster fly. For anyone still wondering how the Rocket trim does it, here's the breakdown: Underbody suction for grip: Powered fans draw air out from under the floor so atmospheric pressure presses the car against the surface. Tesla says the system pulls up to 2 Gs, boosts cornering beyond a typical 1.6 G tire limit to >2 Gs, and can hold the car upside down at zero speed. Compressed air for flight: Two tanks (600L total) hold ~250 kg of air feeding 10 nozzles. Four rear jets generate >80 kN of thrust, hitting 0 to 60 mph in 0.81s during the demo, while perimeter thrusters provide upward lift and midair attitude control until the tanks run dry.
100
245
49
1,699
208,109
GeertjanCap retweeted
Configurations – Performance: road ready, seats 2 Active aerodynamics & multi-mode suction system for next-level performance on & off the track – Thrust: race ready, seats 2 Multi-mode suction system paired w/ rear-mounted cold-gas thrusters that enable 0–60 in <1 second – Rocket: air ready, seats 1 Multi-mode suction system plus perimeter-mounted cold-gas thrusters supporting forward & upward acceleration plus lateral rotational movement. So...yes, it can fly Range >300 miles Top speed up to >230mph (Rocket) 0-60 Performance (<1.6) Thrust (<0.9) Rocket (<0.59) Reserve now – Tesla.com/Roadster
864
3,158
874
34,845
2,795,158
GeertjanCap retweeted
WTF 🚨 The Telsa Roadster just defied gravity by hanging upside down, then LAUNCHING off a ramp did a 180 in the air and levitated to the ground... What did we just watch 👀
1,193
3,157
751
28,168
9,727,868
GeertjanCap retweeted
This is the most powerful single steam-turbine train ever built for electricity generation. Built at Belfort in France by Arabelle Solutions, two of these enormous machines are being installed at Britain’s Hinkley Point C nuclear power plant. Each can generate an immense 1,770 MW of electricity while turning at just 1,500 rpm, driven by roughly 2.4 tonnes of steam every second from a 4,500 MW thermal EPR reactor. As that steam expands toward the near vacuum condenser, its density collapses and its volume becomes enormous. The final low pressure blades are therefore an extraordinary 1.9 metres long, so large that controlling their weight, centrifugal loads and vibration required new design and manufacturing processes. Its massive welded rotors and high strength steels are engineered to withstand decades of centrifugal stress, thermal cycling, vibration and wet-steam erosion. Together, the two turbines will deliver around 3.2 GW to the grid, enough to power 6 million UK homes and meet close to 10% of the entire UK’s electricity demand from a single nuclear plant. Well performing nuclear fleets can exceed 90% availability, equivalent to roughly 330 full power days a year. Now let's consider the physical scale. Britain’s largest operating solar farm, Cleve Hill, uses more than 560,000 panels across roughly 900 acres. At typical UK solar output, it would take around 79 days to generate what Hinkley Point C nuclear reactor can deliver in 24 hours. Hornsea 2 has 165 offshore wind turbines spread across 462 km² of sea. At typical UK offshore wind output, the entire farm would need roughly 6 days to generate the same amount of electricity. Hinkley Point power plant's permanent development footprint is only 167 acres. Two turbines, gigawatts of sustained output, from a remarkably small physical footprint. There is simply no other major power generation technology that demonstrates power density at this scale quite like nuclear does.
33
209
29
1,085
46,278
I guess that Satoshi guy was pretty smart after all.
13
43
4
289
30,746
GeertjanCap retweeted
River explains what the government leaves out when it talks about inflation.
7
104
19
408
34,637
GeertjanCap retweeted
I fixed it. Flight 1 vs Flight 14
unavailable
34
171
30
2,508
219,147
GeertjanCap retweeted
Starting today, I'm going to give the world a first hand view of what it is like to own, operate and grow a small manufacturing business. Beginning with this picture. This is a picture of my not-so-glamorous shop in northern Illinois. It's also the reality of thousands of other small machine shops across the country. Mostly older machines (newest 2019), less organized and dirtier than I aim for. I've worked here since I was 13, ran it since I was 24 and owned it since I was 26. I’m 32 now. I’ve been considered an old soul and have always kept it real, but what I am about to do scares me. See, my Opa started this company in 1977 and he always wanted to break $1M in revenue. To celebrate him and the 50th anniversary of Center Tool Company I’m going to do it. I will double our revenue AND do it publicly. We are on target for $500k in ’26 (pretty much been 500-800k since 1977, very unspectacular) In ’27 we will break a MIL. In the grand scheme of things that's pretty small, but it could be entertaining to ride along on the journey. I’m going to show basically every aspect of what I know and how I do things. I will post about stuff and include actual screen shots, pictures, statements, and documents. Maybe some videos of day in the life or the joys of defense contracting... I’ll break down the inner workings of not just turning raw metal into finished tooling or parts, but also working with customers, banks, lawyers, the government, family/business and family-business dynamics, personal/business finances, and raising a young family through this. What do you want to know and/or what I am doing wrong? Comment or DM America sits at the precipice of reindustrialization. We have a monumental opportunity in front of us. It’s time to burn the ships and go all in. Bringing manufacturing back to our country could return a healthy middle class and economic boom across small town America - where I live.
546
641
83
8,802
236,538