Hamshop.cz (@HamshopCZ) header
Hamshop.cz (@HamshopCZ) profile picture

Internet shop with parts and kits for Ham Radio.

Pardubice, Czech Republic
Joined December 2012
Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)Photo by Hamshop.cz (@HamshopCZ)
13 cm DATV with just an Android phone and two cheap ESP32 boards, no PC 📡📺 ATV RX/TX is an open-source app: 📥 RX: an ESP32-S3 on USB OTG samples the 2.4 GHz band; leandvb on the phone demodulates DVB-S2 (QPSK/8PSK, 40–500 kS/s) and shows the picture, spectrum, constellation and MER 📤 TX: the ESP32-C3's own Wi-Fi radio is the transmitter. The phone encodes the camera or a test card to H.264 and DVB-S2 itself and streams the symbols to the C3 📌 Stand-alone beacon: record a loop with your callsign on the phone and store it in the C3; it then transmits by itself after every power-up 🔧 Firmware for both boards is flashed straight from the app Based on SP8ESA's ESP32-DATV and TA7W's ESP32-DATV-SA. Thanks! APK and guide: github.com/ok1cdj/ESP32-ATV For licensed radio amateurs only. @BATCOnline @hackaday @EspressifSystem #hamradio #DATV #ESP32 #DVBS2 #SDR
5
32
1
158
7,195
kQSO 1.9 is out 📻 Any Icom now works with the logger through the little M5Atom: band, mode and frequency from the radio, tune it by typing in the log. IC-705 over Bluetooth as before. github.com/ok1cdj/kQSO Build the keyer and CIV interface: keyer.ok1cdj.com/build.html #hamradio #SOTA #POTA #amsat #icom
1
3
327
M5-ESP32-keyer v2 is out 📡 Open-source text-to-CW keyer for M5Stack Atom boards (Atom Lite, AtomS3 Lite, AtomS3 with display). • Send text over Bluetooth LE, HTTP or UDP cwdaemon • Keys the rig through an optocoupler or a single MOSFET on the Grove port • AtomS3 shows the text being sent on its display • Runs on the Atomic Battery Base, battery level over BLE • Flash it from your browser, no IDE needed Flasher: keyer.ok1cdj.com Code: github.com/ok1cdj/M5-ESP32-k… #hamradio #CW #ESP32 #M5Stack #cw4ever @M5Stack
1
5
25
1,877
kQSO – a ham radio logger for portable with one smart input line 🌐 kqso.ok1cdj.com Type "OK1CDJ JN79US" and kQSO works out the call, report and locator on its own. No field hopping, just a few taps per QSO. • SOTA / POTA / WWFF activations, S2S references • VHF contests: QRB scoring, QSO map, stats, EDI export per band • Satellites (RS-44, SO-50, ISS, QO-100…), uplink/downlink set for you • Bands from 160 m up to 76 GHz • Own on-screen keyboard, e-ink mode for the Mudita Kompakt, also runs on phones, iPad and desktop • Offline web app + Android APK • ADIF export, one-tap push to your own Wavelog • Callsign & locator suggestions, dupe warning Free and open source (GPL-3.0). 📦 github.com/ok1cdj/kQSO #hamradio #SOTA #POTA #WWFF #amateurradio
4
4
20
1,033
📡 The first public beta of Web FT8 Client is now LIVE! 🚀Run a full-featured FT8 station entirely in your browser—no installation required. Perfect for ultra-light portable ops (SOTA/POTA/field days) using just your phone or tablet! Key features: 💻 WebSerial CAT for desktops 📱 Custom WebUSB driver for Android 🤖 Automated QSO State Machine 🎛️ "Fake Split" TX optimization to keep your signal clean Spin up your rig and try it here: ft8web.ok1cdj.com/ Let me know how it handles your radio!✨ 73! #HamRadio #AmateurRadio #FT8 #SOTA #POTA #WebUSB #OpenSource
5
11
2
74
5,891
Hamshop.cz retweeted
3D-printable air-core coil generator for OpenSCAD, featuring built-in inductance calculation. Useful not only for antenna tuning circuits.
4
14
1
109
4,874
Hamshop.cz retweeted
Hey #SIX #50MHz freaks! Awesome news!
Good News! 9V 6m License has approved. Only 50.313~50.316 Bandwidth 3kHz max. FT mode. Max 100W PEP.
1
5
572
Tomorrow leaving to #hamradio2022. You can find me in flea market Hall A4 - stand H069-H072. Looking to see you my friends.
1
1
15
Nouveau jouet super, config sous CQRLOG et WIN-TEST/Linux nickel, y a plus qu'à 😋 @HamshopCZ #k3ng #uft #cw
2
12
Hamshop.cz retweeted
NEW: 4-way Bi-Dir beverage system with controller remoteqth.com/4way-controlle… | #hamradio #antenna
3
14
Hamshop.cz retweeted
NEW: Preamp module with 2N5109 remoteqth.com/preampmodule.p… | #hamradio #preamp #kit
4
9
#esp8266 board is ready for testing.. – at Pardubice, Czech Republic
5
6
Hamshop.cz retweeted
#RaspberryPi raspi camera extension via two shielded utp cable goo.gl/YXfUHx
8
4
Only last 7 days of our campaign for Electra I - modular electronics education KIT on @indiegogo igg.me/p/711796/twtr/5757581 Pls retweet.
1
1