WiiM Ultra + Marantz PM6007. Which DAC is active?
Stereo RCA from Line Out to CD uses WiiM’s DAC. Optical Out to Optical 1 uses Marantz’s DAC. The Marantz drives the DALI OBERON 3 in both setups.
Explore the setup on HiFiSync.
hifisync.com/components/wiim…
🤖 Made with AI
86
WiiM Ultra X / Ultimate prototype in Paris: reported eARC, USB-C audio in and a 5-inch screen. Photo: my original Ultra with a Hegel H390. gadgetradar.co.uk/?p=7452
If you already own an Ultra, what’s connected to it and what one feature would make you switch?
75
AIYIMA T9 Pro: 2.5 m or 4 m?
At 95 dB peaks, HiFiSync's estimated sensitivity threshold rises from ~83 to ~87.1 dB. Model basis: estimated 50 W / 8 ohms, not measured output.
Check your listening distance on HiFiSync.
hifisync.com/match/speakers-…
🤖 Made with AI
1
86
WiiM Amp Ultra: KEF Q1 Meta, Q3 Meta or DALI SONIK 7?
I checked headroom at 2.5 m / 95 dB peaks. Both KEFs flag a power Caution; SONIK 7 shows Pass. Sensible levels matter. These calculations don't predict sound.
Check your pairing at hifisync.com.
🤖 Made with AI
73
The Pro-Ject MaiA DS3, Amp Box S3 and Speaker Box 5 S2 are now available in HiFiSync. Explore the expanded range.
Build a full system:
hifisync.com/brands/pro-ject…
Product photos: Pro-Ject Audio Systems.
🤖 Made with AI
13
Seven reader-suggested DACs are now available in HiFiSync. I checked their connections and loading with my Hegel H400. The next step is listening.
reddit.com/r/hifisynergy/com…
🤖 Made with AI
15
My listening room, and the same system in HiFiSync.
ProAc K6 Signature, two REL T/7x, Hegel H400 and Rega.
Explore my system on HiFiSync.
hifisync.com/@piotr-dziubeck…
@proacspeakers @RELAcoustics @hegel_music @RegaResearch
32
Arendal 1528 Monitor 8: about 63 W at 2.5 m, 160 W at 4 m.
Model estimates per channel into 4 ohms for 95 dB peaks. Your room matters; leave headroom.
Build a full system: hifisync.com/match/amplifier…
🤖 Made with AI
14
Vitus Audio is now available in HiFiSync: 21 entries across amps, digital sources and phono stages. Explore the range.
Build a full system:
hifisync.com/brands/vitus-au…
🤖 Made with AI
1
17
What speakers for the Luxman M-10X?
With ATC SCM40: modelled Pass, +6.8 dB at 2.5 m for 95 dB peaks. Published specs are the starting point; audition the pair.
Build a full system: hifisync.com/match/speakers-…
🤖 Made with AI
42
What speakers for the Lyngdorf TDAI-3400?
With ATC SCM11: modelled Pass, +8.1 dB at 2.5 m for 95 dB peaks. Published specs are the starting point; audition the pair.
Build a full system: hifisync.com/match/speakers-…
🤖 Made with AI
20
HiFiSync recommends Audio Freezer, our partner Mac app. It watches your audio devices and restores your chosen sample rate after reconnects or resets.
I build both apps.
apps.apple.com/app/audio-fre…
🤖 Made with AI
1
11
Shanling is now available in HiFiSync: 40 catalogue entries spanning CD players, streamers, DAC/amps, integrated amplifiers and speakers. Some source data is incomplete, so check each listing as you build a full system.
hifisync.com/brands/shanling
🤖 Made with AI
1
23
Every dot is a speaker. External cabinet volume across, nominal cone area up.
The trend gives a design clue, not a bass measurement or sound-quality score.
Explore your speaker at hifisync.com.
hifisync.com/components/bowe…
🤖 Made with AI
1
50
The Pylon Audio Pearl Monitor is now available in HiFiSync.
With NAD C 316BEE V2: modelled Pass, +2.1 dB at 2.5 m for 95 dB peaks. Speaker data remains partial.
Build a full system: hifisync.com/components/pylo…
🤖 Made with AI
1
47
The Dynaudio Legend is now available in HiFiSync.
With NAD C 389: modelled Pass, +3 dB at 2.5 m for 95 dB peaks. Minimum speaker impedance is unpublished.
Build a full system: hifisync.com/components/dyna…
🤖 Made with AI
1
36
The Fosi Audio T20X MKII is now available in HiFiSync.
With Sapphire 23: Pass on listed specs. Maximum amp power and an unknown sensitivity basis leave the real margin uncertain.
Build a full system: hifisync.com/components/fosi…
37
The Pylon Audio Sapphire 23 is now available in HiFiSync.
Room Fit: about 51 W at 4 m for 95 dB peaks. Its unpublished sensitivity basis leaves uncertainty.
Build a full system: hifisync.com/components/pylo…
34

