Three PCs, one public IP address.
That is PAT. The key word is overload.
Check it with: show ip nat statistics
#ccna #cisco #networking
1
29
Lock a switch port to one device in 4 commands.
sticky makes the switch learn the MAC address by itself.
Check it with: show port-security interface g0/1
#ccna #cisco #networksecurity
1
48
One link, two VLANs.
A trunk carries VLAN 10 and VLAN 20 between two switches.
Check it with: show interfaces trunk
#ccna #cisco #networking
Two VLANs on one switch in 10 commands.
Sales in VLAN 10, Tech in VLAN 20.
One command to check it: show vlan brief
#ccna #cisco #networking
SSH on a Cisco router in 7 commands.
Then one command to prove it works: show ip ssh
Telnet sends your password in plain text. SSH encrypts everything.
#ccna #cisco #networking
OSPF stub area.
A branch office with one router and one link out still receives every external route the whole company learns. Thousands of Type 5 LSAs, for a router with one exit.
How it works:
🔵 Make the area a stub
🔵 Type 4 and 5 LSAs stop at the border
🔵 The ABR sends a default route instead
🔵 The branch router keeps one line: "everything else, go that way"
Trap: every router in the area must agree it's a stub, or the adjacency never forms.
3
76
STP root bridge election.
Every switch on your network is holding a vote right now. Every 2 seconds.
How it works:
🔵 Candidate = Bridge ID: priority + VLAN ID, then MAC address
🔵 Lowest wins
🔵 Every switch ships with priority 32768. So the MAC decides
🔵 Lowest MAC = usually your oldest switch. The one in the closet
That switch is now the center of your network. Fix: spanning-tree vlan 1 priority 4096 on the one you actually want.
IPsec.
New York sends a packet to San Francisco. It crosses two ISPs. Anyone on the way can read it.
How it works:
🔵 IKE Phase 1: the routers authenticate and build a secure channel. Slow, once
🔵 IKE Phase 2: inside it, they agree on how to encrypt the data. Fast, renewed often
🔵 Transport mode: encrypts the data, keeps the original IP header
🔵 Tunnel mode: encrypts everything, adds a new IP header. Site to site. The one you'll use
The ISPs still forward the packet. They just can't open it anymore.
Extended ACL.
Legal needs the Legal server. Legal must never touch the HR server. Same PC, same router, two different answers.
How it works:
🔵 A standard ACL only looks at the source. Useless here
🔵 An extended ACL looks at source, destination, protocol, port
🔵 "Legal → HR server: deny. Legal → anything else: permit." Two rules
🔵 Extended: close to the source. Standard: close to the destination
Every list ends with an invisible deny all. Forget that, and you block yourself.
1
83
MPLS Layer 3 VPN.
One ISP. Two customers. Both use the exact same private subnets. Their traffic crosses the same routers and never mixes.
How it works:
🔵 The ISP edge router (PE) runs one VRF per customer. Separate routing table
🔵 MP-BGP between the PE routers carries the routes across the core
🔵 A Route Distinguisher is glued in front of each route. Two identical subnets become two different routes
🔵 The core routers (P) never see any of it. They just switch labels
3
85
DHCP Relay.
Your PC boots and shouts: "anyone got an IP for me?" That's a broadcast. Routers don't forward broadcasts.
How it works:
🔵 ip helper-address on the interface facing the PCs
🔵 The router catches the broadcast, turns it into a unicast
🔵 Sends it straight to the DHCP server in the other subnet
🔵 The reply comes back through the same router
One server. Every subnet. One line of config.
1
56
The PingMyNetwork method, part 2: daily review.
Every morning, a short deck is waiting for you. 12 questions on what you learned this week.
🔵 Get it right, you move on
🔵 Get it wrong, you get the explanation right there, and the card comes back tomorrow
🔵 3 minutes a day
That's what keeps CCNA topics in your head for months, not days.
3
72
SD-WAN.
The old way: one expensive MPLS link per branch. Cloud traffic goes branch → HQ → internet → back.
How it works:
🔵 Each branch gets MPLS, internet, and 4G. Use all three
🔵 vManage: the dashboard. vBond: the doorman
🔵 vSmart: the brain, pushes policy to every branch
🔵 vEdge: the branch router. Does what it's told
The routers stop making decisions. The controller makes them. That's the whole shift.
2
59
18 free Cisco labs you can do in your browser.
10 for the CCNA, 4 for CCNP ENCOR and 4 for CCNP ENARSI.
You configure the routers and switches, check that it works, and get a flag at the end. No need to install Packet Tracer.
pingmynetwork.com/labs
🆕 PingMyNetwork Sandbox is live.
A network simulator in your browser. Build topologies, configure routers and switches, nothing to install.
100% free for 14 days 👉 pingmynetwork.com/sandbox
🎁 Cisco exam vouchers (CCNA or CCNP) to win: pingmynetwork.com/event/sand…
1
79
EtherChannel.
Two cables between two switches. STP sees a loop and blocks one. You paid for two links, you get one.
How it works:
🔵 Bundle them into one logical link. STP sees one port
🔵 Both cables carry traffic. One dies, no reconvergence
🔵 On: forced, no negotiation
🔵 PAgP (Cisco): desirable + auto. LACP (standard): active + passive
The trap: passive + passive, or auto + auto. Both sides wait. Nothing happens.
BGP Weight vs Local Preference.
Two ISPs, same destination. BGP has to pick one. You want to be the one deciding.
How it works:
🔵 Weight: local to this router only. Cisco-proprietary. Never shared
🔵 Local Preference: shared across your whole AS. Every router agrees on the exit
🔵 Both: highest wins. Weight is checked first
🔵 Then the other 9 steps nobody remembers
Exam trap: Weight doesn't leave the router. Local Pref doesn't leave the AS.
















