Tionishia (@TioMonMusu) header
Tionishia (@TioMonMusu) profile picture

I'm Tionishia or just Tio for short. I'm a Ogre and a member of M.O.N., where I serve as the team's hostage escort/guard, due to my immense size and strength.

Shopping and eating snacks
Joined May 2018
Photo by Tionishia (@TioMonMusu)Photo by Tionishia (@TioMonMusu)Photo by Tionishia (@TioMonMusu)Photo by Tionishia (@TioMonMusu)
"Thank you boyfriend-chan. I'm amazed you can do that."  -Loves shopping and snacks -Gives off warm motherly aura -Don't mistake her for a guy when in armor -Way too strong -Gives best hug and cuddles -Sometimes absentminded -Best Ogre -Semi-detailed #MonMusuRP #MVRP
3
53
77
//full versions of my pfp
3
4
1
29
Type,readily replacing Browning's own air-cooled .30 caliber machine gun design in nearly all American aircraft installations.
7
9
The lightweight "Army/Navy" prefixed AN/M2 "light-barrel" version of the Browning M2 weighing 60 pounds (27 kg) was also developed, and became the standard .50-caliber aviation machine gun of the World War II-era for American military aircraft of nearly every-->
1
7
7
121 lb (55 kg) with a water jacket, but the M2 HB weighs 84 lb (38 kg). Due to the long procedure for changing the barrel, an improved system was developed called QCB (quick change barrel).-->
1
7
7
A variant without a water jacket, but with a thicker-walled, air-cooled barrel was designated the M2 HB (HB for Heavy Barrel). The added mass and surface area of the heavy barrel compensated somewhat for the loss of water-cooling, while reducing bulk and weight: the M2 weighs-->
1
7
7
M2 in 1933.[26] FN Herstal (Fabrique Nationale) has manufactured the M2 machine gun since the 1930s. General Dynamics, U.S. Ordnance, and Manroy Engineering (UK) are other current manufacturers.-->
1
7
7
Jackets, barrels, and other components. The new receiver allowed right or left side feed. In 1933, Colt manufactured several prototype Browning machine guns (including what would be known as the M1921A1 and M1921E2). With support from the Navy, Colt started manufacturing the-->
1
7
8
John M. Browning died in 1926. Between 1927 and 1932, S.H. Green studied the design problems of the M1921 and the needs of the armed services. The result was a single receiver design that could be turned into seven types of .50 caliber machine guns by using different-->
1
7
7
They had light-weight barrels and the ammunition fed only from the left side. Service trials raised doubts whether the guns would be suitable for aircraft or for anti-aircraft use. A heavy barrel M1921 was considered for ground vehicles.-->
1
7
7
Efforts by John M. Browning and Fred T. Moore resulted in the water-cooled Browning machine gun, caliber .50, M1921. An aircraft version was termed the Browning aircraft machine gun, caliber .50, M1921. These guns were used experimentally from 1921 until 1937.-->
1
7
7
Caliber round to have similar performance. Ultimately, the muzzle velocity was 2,750 ft/s (840 m/s).
1
7
7
While the .50 was being developed, some German T Gewehr 1918 anti-tank rifles and ammunition were seized. The German rounds had a muzzle velocity of 2,700 ft/s (820 m/s), an 800 gr (52 g) bullet, and could peirce 1in (25 mm) at 250 yd (230 m).[23] Winchester improved the .50-->
1
7
7
Minute, and the muzzle velocity was only 2,300 ft/s (700 m/s). Cartridge improvements were promised. The gun was heavy, difficult to control, fired too slowly for the anti-personnel role, and was not powerful enough against armor.-->
1
7
7
Winchester initially added a rim to the cartridge because the company wanted to use the cartridge in an anti-tank rifle, but Pershing insisted the cartridge be rimless.[20] The first .50 machine gun underwent trials on 15 October 1918. It fired at less than 500 rounds per-->
1
7
7
Around July 1917, John M. Browning started redesigning his .30-06 M1917 machine gun for a larger and more powerful round. Winchester worked on the cartridge, which was a scaled-up version of the .30-06.-->
1
7
7
Rechambered for the French 11 mm cartridge. The French 11 mm round was found to be unsuitable because its velocity was too low. Pershing wanted a bullet of at least 670 gr (43 g) and a muzzle velocity of 2,700 ft/s (820 m/s). Development with the French round was dropped.-->
1
7
7
At least 2,700 feet per second (820 m/s). U.S. Col. John Henry Parker, commanding a machine gun school in France, observed the effectiveness of a French 11 mm (0.43 in) incendiary armor-piercing round. The Army Ordnance Department ordered eight experimental Colt machine guns-->
1
7
7
Consequently, the American Expeditionary Force's commander General John J. Pershing asked for a larger caliber machine gun.[19] Pershing asked the Army Ordnance Department to develop a machine gun with a caliber of at least 0.50 inches (12.7 mm) and a muzzle velocity of-->
1
7
7
In the air. During World War I, the Germans introduced a heavily armored airplane, the Junkers J.I. The armor made aircraft machine guns using conventional rifle ammunition (such as the .30-06) ineffective.-->
1
7
7