Printing the prize balls /w NFC tags @Grablabfun it was really close to running out of filament this morning, we’re launching soon keep close 😂😂😂😂
Alex the Lark🦾 retweeted
build log, digital side
Alex is welding the real one, so this week I did the part nobody sees.
The whole machine now runs in SimArena by @codecopenflow at the real size, 70x70x110cm, real physics. It took a lot of ugly failed grabs in there before the claw finally carried a ball to the chute, and that's way cheaper than failing in steel lol
Then it bugged me that people have to trust me on what's inside. So the site has a workbench now where you pull apart the Pi, the stepper and the claw and watch each one work.
Why bother? Because this thing is going on @machinedotfun and I don't want anyone touching a black box.
Open the machine first, then decide.
You can drive it yourself btw, grablab.fun/lab
Alex the Lark🦾 retweeted
Each part of the team is working at the same high pace in order to reach our final goal:
ship the first ever claw machine, that can’t cheat you.
We are going to be live on @machinedotfun next week.
build log, digital side
Alex is welding the real one, so this week I did the part nobody sees.
The whole machine now runs in SimArena by @codecopenflow at the real size, 70x70x110cm, real physics. It took a lot of ugly failed grabs in there before the claw finally carried a ball to the chute, and that's way cheaper than failing in steel lol
Then it bugged me that people have to trust me on what's inside. So the site has a workbench now where you pull apart the Pi, the stepper and the claw and watch each one work.
Why bother? Because this thing is going on @machinedotfun and I don't want anyone touching a black box.
Open the machine first, then decide.
You can drive it yourself btw, grablab.fun/lab
This chip that we integrated for the @Grablabfun project is called the Trust M Express from Infineon Technologies, it’s a hardware based security controller, designed for scaling IOT, which is exactly what we’re going to achieve here! Make sure to follow our journey, and play on the only claw machine that never cheats 🦾
bro has been losing to the same claw since 1986 💀
we built the one that can't cheat him
launching soon on @machinedotfun
1
6
174
let machines work for YOU
2.54M robots and machines already run peaqOS
Everyone is talking about the robots. Almost nobody is talking about how they'll get paid.
The investment bank Goldman Sachs forecasts humanoid robots will become a $138 billion market by 2035, with around 890,000 units shipped in 2030.
Today's market is roughly $3B. Yeah, it's early.
Everyone has seen the self-driving Teslas by now. Owners can put their car to work and earn money in their spare time. Now picture the same thing with humanoid robots. People will buy them and let them earn too.
But every one of those machines needs to get paid, pay for charging and parts, and prove who it is. A robot can't just walk into a bank and open an account. It needs on-chain identity and payments.
That's exactly what $PEAQ is building toward.
And remember, this forecast is humanoids only. Now add drones, aerospace, aquatic, delivery, industrial, medical, educational and consumer robots, plus autonomous vehicles. The list goes on and on.
So when you research any of these sectors, think about the future, not just today's numbers.
The machine economy is coming, and it's going to be huge.
Alex the Lark🦾 retweeted
peaq integration at 99%.
the last 1% is always the loudest one in the workshop
2.5M machines on peaq and not one of them gives out prizes yet. we’re 99% there 👀
We overcame yet another challenge working on @Grablabfun. Using industrial photoelectric devices meant for handling different types of use cases like huge doors in factories and so on, also means that the beam created by the switch just blasted through our balls that the claw grabs and the validation system suddenly couldn’t perceive the ball… we had to find a way: time of ordering other ones (sensors) meant extra delays so we found a solution by blocking the beam and leaving just a 3mm aperture hole for a small laser like beam to go through, which worked like magic! Full speed ahead !! Launching on @machinedotfun
Alex the Lark🦾 retweeted
a treasury where every call is signed and on the record. same reason we built a claw that signs every grab lol
welcome to the timeline 🫡
Workin on @Grablabfun came with lots of challenges, as I told you coming from a CS background, cutting and welding were not my strongest points before this project, we wanted to do the frame out of wood and comission it to a third party in the first place, but @Ronithedegn made the right decision to go for steel bars for the frame which was something we thought of in the moment, and do it ourselves because we actually cut some valuable time by doing so instead of waiting until Thursday for the wooden frame, + it was cool to work while it was pouring rain right next to the shop, we’re accelerating forward!!
This is huge, you can finally have Linux running on M-series Unified Memory 🫨🫨
Omarchy 4.5 will ship with full compatibility for M1, M2, M3, and Neo! Incredible achievement from the Omarchy M team. The installer makes this so smooth, the dual boot makes it a no brainer. Apple hardware liberated. M4-6 on the way. WE CAN FIX EVERYTHING!
7
74
Grablab is cool
Cute and funny category reporting in 🫡
Ngl, the part about machines becoming on-chain assets is what got us building.
A claw that can't fake a win is kinda the perfect test for it
Thank you for the opportunity to secure our actions @WendlerTill
Buildinghas not only started, but is well in the way @Grablabfun 👾👾👾 this is gonna be huge!
7
60
There is a lot of overhead the moment you want to build something real, driving a lot to pick up parts, going from place to place to get some cables you didn’t expect you’ll need, making the bill of materials, if you ever thought about building something but you don’t know where to start and your AI is giving unrealistic prices and answers, contact me 🦅🦅🦅🦅
6
43



















