X-59 model at Mach 1.4 in #OpenFoam12 fluid module (rhoSimpleFoam), ran on @dicehub, 4procs, 3000 iterations, took 80 minutes (model from thingiverse.com/thing:600832…)
#blockMesh GUI allows fully structured mesh (890k cells) with continuous boundary layers on the whole vehicle (including wheels) which passes all the quality metrics in #checkMesh and ran in @dicehub 4 procs in 16 minutes - available here github.com/garcfd/blockMesh-…
#blockMesh GUI allows fully structured mesh (890k cells) with continuous boundary layers on the whole vehicle (including wheels) which passes all the quality metrics in #checkMesh and ran in @dicehub 4 procs in 16 minutes - available here github.com/garcfd/blockMesh-…
#blockMesh GUI - fully structured mesh with boundary layers which passes the quality metrics in #checkMesh
#blockMesh GUI now allows structured meshing with o-grid (layermesh) around the whole vehicle. solved in @dicehub #simpleFoam in 16min 4procs. The wheels also have layermesh but the cell quality (wheel/ground interface) needs improvement. github.com/garcfd/blockMesh-…
#blockMesh GUI has been modified to generate o-mesh (boundary layer mesh) around the car geometry - it needs some work to omit or deal with the wheels touching ground-plane, but looks promising. github.com/garcfd/blockMesh-…
#blockMesh GUI was used to create a fully structured car mesh and solved on @dicehub (4 procs) in 15 mins, good cell quality and good convergence. Available here github.com/garcfd/blockMesh-…
making progress with my fully structured #blockMesh GUI. 800k cells case at 20m/sec - mesh fully passes the #checkMesh criteria with no errors. This case ran in #simpleFoam k-epsilon model. The code is here github.com/garcfd/blockMesh-… if you want to give it a try.
after run #checkMesh, its useful to look at problem areas such as neg vol cells, high skew faces, non-orthogonal faces, face pyramid errors. This can be done by "foamToVTK -faceSet skewFaces" and "foamToVTK -faceSet nonOrthoFaces" which creates VTK files you load into #Paraview
5
284
Been developing a GUI for #blockMesh (using AI) which enables me to create a fully structured car mesh run in #simpleFoam. Disclaimer - this is the very first solution. Happy #simulationFriday folks!
something different... flow through an Ellis 3D wormhole. blockMesh created 2 separate spaces and there is flow between them via a spherical 'throat'. The velocity is relaxed and reversed from roomA to roomB and the pressure is just relaxed from roomB to roomA - codedFixedValue
2
303




























