
Automating design for the physical world | Drones and 3D printing | Building @kyrall_
Mรผnchen, Bayern
Joined July 2023
- Tweets450
- Following903
- Followers783
- Likes506
OsamaAtwi retweeted
OK, here you go. app.oshcut.com/api/mcp
OsamaAtwi retweeted
Raising in Germany:
I recently raised an angel round with my German GmbH (so excited to have everyone on board๐ฅ) and didnยดt really feel like there was a lot of transparency around the process, so I just wanted to share what I learned:
> I knew from stories that US companies in early stages normally do SAFEs and German Companies CLAs. Tbh the difference is less important, but a CLA is a convertible loan agreement, where an entity loans your company money with a clause that this loan can be converted into equity in the next priced round (a round where actual shares of your company are bought).
> In CLAs, you can have a valuation cap or a discount or both. A cap is the maximum valuation your investors will pay for the shares in the next round. A discount gives a discount on the specified price in the next round. You can either have one or both, where then the better scenario for your investor is realized.
> When you have many people that want to invest maybe with smaller tickets, it is good practice to pool them right away. Pooling describes collecting many smaller entities into one larger entity. You can do that with a Special Purpose Vehicle (SPV). Either you set this up yourself (not worth your time) or go with a company specializing in that. Roundtable charges around 1% of the SPV amount (โฌ5k minimum). AngelList charges a flat setup fee of roughly $8kโ10k (both afaik). This SPV then puts in 1 CLA into your company and will have just one representative for the SPV and not all 20+ people that invested in this SPV.
> Depending on whether you have a pooling clause in your CLA, you can also pool the investors from the CLAs in the next round together, so again only 1 person represents the group of them and in the future has to take care of notary appointments.
> Sign the CLA via DocuSign.
> US investors can easily invest; often, they invest via AngelList on their side to take care of US tax law.
> Nobody actually goes to the notary this round!
In the next round, in theory, everyone that has signed a CLA needs to go to the notary, even the ones that have a pooling clause in their CLA. The only ones that do not have to go to the notary are the ones that invested in the SPV; there only the SPV manager has to go.
*The good thing is: by sending you a power of attorney from their local notary, nobody actually has to travel to you to sit with you inside the notary. Of course, some people want to do that, or it is in their investment process... then they can. + Video is sometimes also an option.
> So as a rule of thumb, I would say if you have many small tickets (10+), do an SPV. If you only have larger tickets, CLAs are easily signed, and if you have both, just do both. In the CLA, look for your valuation; is it a post-money or pre-money valuation for the cap, and do you want a pooling clause in the CLA?
That being said, these are just random learnings that helped myself make decisions and not binding advice, and I am curious if someone has to add something to bring some transparency into European fundraising.
OsamaAtwi retweeted
I fixed this graph by A16Z.
One Trillion spent on AI Capex in 2026, the story isn't in chips alone.
For every $100 flowing into the supply chain
- $2.5 to castings
- $1 to forgings
- $3.6 to sheet metal parts
- $2 to Plastic
- $2.4 to CNC machining
without these manufacturing technologies, the rest isn't even possible.
Where does money invested into the AI buildout actually go?
For every $100 flowing into the supply chain:
- $50 to chips
- $20 to power
- $15 to networking
- $15 to cooling, buildings, and land
More charts in State of Markets II: a16z.news/p/state-of-marketsโฆ
if you are a programmer and you'd like to start a company it is helpful to internalize two big weaknesses you have
1. your instincts for anything outside programming are terrible. everything you believe is likely 100% backwards
2. you've always been treated like the smart person in the room so it will take you a very long time to understand #1
for me personally it took ~ 10 years before i started to be able to unwind this
OsamaAtwi retweeted
Day 3 of seeing how we can deploy physical AI in Europe.
I was at 11 companies in 2 days, getting to speak to the right person is an art,
more here:
OsamaAtwi retweeted
Human dignity, freedom, democracy, equality, the rule of law and human rights. These are the values of the European Union, and they stretch across the whole continent. I firmly believe they are values anyone, across any border, could be proud of, and I am sure a lot of people quietly align on them.
But what actually gives a person or a company the power to live by these values freely? I think economic strength is one of the biggest levers. It is what turns the values you claim into values you can afford. And from economic strength follows political strength.
We are now seeing political decisions reach all the way down to the individual builder. The best AI model I have ever worked with was switched off, a call made in the US, and overnight turning an idea into a working product got slower than it had been the day before (still fast, just slower). That is a strategic disadvantage you feel at your own desk, and it is evolving into something larger.
It compounds, because capitalism always pushes you towards the cheapest route: buy the thing that is "too expensive to make yourself" from someone else. Raw materials, chips, data centres, all the way up to the AI models you deploy, especially in critical applications. This is exactly where values collide with the reality we operate in. If we keep optimising only for cost now, soon none of us will be able to afford the values we started with.
So what can you actually do?
If you share a set of values with a group, the most powerful thing you can do is help each other succeed and genuinely believe in each other, down to the individual. There is a paradox hiding in that: ๐๐ต๐ฒ ๐บ๐ผ๐ฟ๐ฒ ๐ฝ๐ฒ๐ผ๐ฝ๐น๐ฒ ๐ต๐ฒ๐น๐ฝ ๐ฒ๐ฎ๐ฐ๐ต ๐ผ๐๐ต๐ฒ๐ฟ, ๐๐ต๐ฒ ๐บ๐ผ๐ฟ๐ฒ ๐ฐ๐ผ๐บ๐ฝ๐ฒ๐๐ถ๐๐ถ๐๐ฒ ๐ฎ๐ป๐ฑ ๐ฟ๐ฒ๐น๐ฒ๐๐ฎ๐ป๐ ๐ฒ๐ฎ๐ฐ๐ต ๐ผ๐ป๐ฒ ๐ฏ๐ฒ๐ฐ๐ผ๐บ๐ฒ๐.
What Europe needs most right now is a mindset shift: ๐๐ต๐ฒ ๐ฟ๐ฒ๐ฎ๐น๐ถ๐๐ฎ๐๐ถ๐ผ๐ป ๐๐ต๐ฎ๐ ๐๐ผ๐, ๐ฎ๐ ๐ฎ๐ป ๐ถ๐ป๐ฑ๐ถ๐๐ถ๐ฑ๐๐ฎ๐น, ๐ฐ๐ฎ๐ป ๐ป๐ผ๐ ๐ผ๐ป๐น๐ ๐ฏ๐ฒ ๐ถ๐บ๐ฝ๐ฎ๐ฐ๐๐ฒ๐ฑ ๐ฏ๐๐ ๐ฎ๐น๐๐ผ ๐ต๐ฎ๐๐ฒ ๐ฎ๐ป ๐ถ๐บ๐ฝ๐ฎ๐ฐ๐ ๐๐ผ๐๐ฟ๐๐ฒ๐น๐ณ!
Your mindset is elevated when you are in a room with people who are smarter and more ambitious than you. Finding them is easy once you know what to look for: anyone pushing the frontier in their job, their research, their side project or their startup is one of those people. They are closer than you think. I talk to people from chairs at TUM who sit literally next to each other and have never met the PhD in the neighbouring lab working on almost the same problem. The same applies to people working on startups or in industry who could all be supporting each other. ๐ง๐ต๐ฒ ๐๐ฎ๐น๐ฒ๐ป๐ ๐ฎ๐ป๐ฑ ๐๐ต๐ฒ ๐ธ๐ป๐ผ๐-๐ต๐ผ๐ ๐ฎ๐ฟ๐ฒ ๐ต๐ฒ๐ฟ๐ฒ, ๐ฏ๐๐ ๐๐ต๐ฒ ๐๐ต๐ฎ๐ฟ๐ฒ๐ฑ ๐ฑ๐ฟ๐ถ๐๐ฒ ๐ฎ๐ป๐ฑ ๐บ๐ผ๐๐ถ๐๐ฎ๐๐ถ๐ผ๐ป ๐ฎ๐ฟ๐ฒ ๐บ๐ถ๐๐๐ถ๐ป๐ด. ๐๐ ๐ถ๐ ๐ฎ๐ ๐ถ๐ณ ๐ฒ๐๐ฒ๐ฟ๐๐ผ๐ป๐ฒ ๐ถ๐ ๐๐ฎ๐ถ๐๐ถ๐ป๐ด ๐ณ๐ผ๐ฟ ๐ฝ๐ฒ๐ฟ๐บ๐ถ๐๐๐ถ๐ผ๐ป ๐๐ผ ๐ฏ๐๐ถ๐น๐ฑ ๐๐ผ๐บ๐ฒ๐๐ต๐ถ๐ป๐ด, ๐ฝ๐ฒ๐ฟ๐บ๐ถ๐๐๐ถ๐ผ๐ป ๐ป๐ผ ๐ผ๐ป๐ฒ ๐ถ๐ ๐ด๐ผ๐ถ๐ป๐ด ๐๐ผ ๐ด๐ถ๐๐ฒ ๐๐ผ๐.
We need more people building, and we need them to find each other. Here is what I am doing about it:
โข Hosting a demo night where you can meet exactly these people.
โข Demoing at Embodied Europe Week tomorrow.
Both links are in the comments. Come, bring someone, and introduce two people who should know each other.
OsamaAtwi retweeted
Munich Hackathon & Germany's first World Cup game on the same day? No problem, when Tacto is dropping the most insane startup merch seen in a while ๐ฎโ๐จ
Munich's engineering talent is still underrated & it was amazing to see that even people from the Netherlands & Sweden came to join us here!
Atira & Kyrall put out amazing tracks with real-world problems to be solved, and Google DeepMind, Tavily, fal, Fastino Labs & Aikido Security provided the infrastructure to solve them.
๐ Next Stops:
Berlin X Reonic (20 & 21st of June)
London X Attio (27th of June)
And then something unannounced that will be insane, I can only say: Bye Bye European Summer, it's time for lock in ๐ซถ
OsamaAtwi retweeted
The best robotics meetup in the world.
Tonight in Berlin
CLANKERS
Multiple fully autonomous heavy duty machines. Industrial multi arm robot installations. Drones. Anti drone products. Space lasers. And thats not even all of it.
luma.com/0devxzvp
OsamaAtwi retweeted
video editing is stuck in 2005, time for something new
introducing diffusion
the first infinite canvas for video and motion graphics
like figma, but for editing
OsamaAtwi retweeted
I watch a lot of those manufacturing videos and this is by far the best shot i ever saw!
OsamaAtwi retweeted
Introducing Diffusion Studio Pro.
The worldโs first multimodal AI studio for professionals.
Think CapCut + Cursor.
Local first, browser based editor (non linear).
Free unlimited tier.
Fully agentic sidebar with access to 16+ generative models.
Comment โDSPROโ to get early access!
OsamaAtwi retweeted
The ideal #cad prototyping tool?
Less edited video and beta signup -> katalyst.ghost.io
#3Dprinting #Engineering #designs #AI #AIAgents
OsamaAtwi retweeted
Instantly convert your technical drawings and photos into parametric CAD models.
Below a video example of a conversion from a technical drawing.
See how KATALYST designs a phone case from just a few photos: katalyst.ghost.io
#CAD #AI #ProductivityTips
OsamaAtwi retweeted
And here is our text-to-CAD demo that got us ๐ฅsecond place at the LLMHack by EF with Mistral and HF
It's an agent that writes code for the CAD model generation
I build the agent for this over the hackathon โ and also went to a nice physics TD, a bio exam, and got a 92 sleep score
teapawt.net/ennucore/status/โฆ
@osaAtwi
@AniC_dev
@williamsburg399 @kaarelkaarelson
Two days ago my friend told me that since I'm writing in ๐ฆ @rustlang (my physics simulation was faster than his Fortran one) I need programming socks (long anime socks or sth).
And now I was participating in this @joinef + @MistralAI + @huggingface #llmhackparis, we built this text-to-CAD thingy and took second place. After the places were announced, we went to take the prizes, and among the second-place prices were the HuggingFace programming socks
The lesson here is this: life doesn't always give you what you want; it gives you what you need
OsamaAtwi retweeted
Some 3d cooking at #llmhackparis @kaarelkaarelson @osaAtwi @AniC_dev @williamsburg399
thanks @joinef @MistralA @huggingface
OsamaAtwi retweeted
Replying to @zoodotdev
@zoodotdev vs our thingy (not cherry-picked)
@kaarelkaarelson @osaAtwi @AniC_dev @williamsburg399 #llmhackparis






























