@printr

The most configurable launchpad. Deploy on any chain in one click. https://xitter.cf/t.co/E3jazQ4KRf

Robinhood, SOL, BNB, Base...
Joined October 2021
Printr retweeted
After taking over as CEO back in early May 2026, the most common question I got was: "So, what's the plan?" The plan was simple: try everything we could to survive with the resources we had left. We pursued every option available: partner campaigns, new chain integrations, cutting costs, pausing our own salaries, onboarding devs, builders and AI agents, a sale process, a fundraise, and plenty more. We got close more than once but nothing concrete came together. Eventually after exhausting every option we had, it became clear we had to call it a day. We will be ceasing Printr's operations by 31 August 2026. Tbh it was (and still is) a tough pill to swallow. I had high hopes that we could turn this around. But what I've had to accept is that we couldn't keep going without the capital or the distribution this market demands. TGE and airdrop are not happening. I know many of you waited a long time for that, and I'm deeply sorry we couldn't deliver on it. It's not the outcome any of us wanted. To everyone who launched on Printr, shipped on top of and alongside us, spammed us with feedback at 3am, or just stuck around when things got messy - thank you. Your support is what kept us going at our lowest points. Building Printr alongside you was the best part of it. Until we meet again. - Lenn
Dear Printr community, Today, we’re sharing that Printr will commence its wind-down process and all operations will cease by 31 August 2026. Over the past three months, we have pursued every option available to reach a sustainable path forward. Without the capital or the distribution backing that today's market requires, Printr is no longer sustainable. Starting from 18 August 2026, every staked position and fees earned from staking across all supported chains will be automatically unstaked/claimed and transferred to the wallet address it was deposited from. The staking feature will be paused subsequently. If you have not received your assets after 20 August 2026, please reach out to us on Discord before 31 August 2026. As a result of the wind-down, there will be no Token Generation Event (TGE) and airdrop. We understand many community members were anticipating these milestones, and we sincerely regret that we are unable to deliver on them. After 31 August 2026, Printr’s application interface (app.printr.money) will go offline and no new tokens can be launched thereafter. Tokens launched through Printr are independent on-chain assets. They are not owned or controlled by us and will continue to exist on the respective chain(s) which they are launched on. Although this chapter is coming to an end, we remain incredibly proud of what we built together. To everyone who used Printr, launched on the platform, partnered with us, contributed feedback, or simply believed in what we were trying to build - thank you. Your trust, enthusiasm, and support meant more than we can express. The Printr Team
33
3
32
7,487
Dear Printr community, Today, we’re sharing that Printr will commence its wind-down process and all operations will cease by 31 August 2026. Over the past three months, we have pursued every option available to reach a sustainable path forward. Without the capital or the distribution backing that today's market requires, Printr is no longer sustainable. Starting from 18 August 2026, every staked position and fees earned from staking across all supported chains will be automatically unstaked/claimed and transferred to the wallet address it was deposited from. The staking feature will be paused subsequently. If you have not received your assets after 20 August 2026, please reach out to us on Discord before 31 August 2026. As a result of the wind-down, there will be no Token Generation Event (TGE) and airdrop. We understand many community members were anticipating these milestones, and we sincerely regret that we are unable to deliver on them. After 31 August 2026, Printr’s application interface (app.printr.money) will go offline and no new tokens can be launched thereafter. Tokens launched through Printr are independent on-chain assets. They are not owned or controlled by us and will continue to exist on the respective chain(s) which they are launched on. Although this chapter is coming to an end, we remain incredibly proud of what we built together. To everyone who used Printr, launched on the platform, partnered with us, contributed feedback, or simply believed in what we were trying to build - thank you. Your trust, enthusiasm, and support meant more than we can express. The Printr Team
120
7
64
133
155,418
Now printing on @MaestroBots. Trade Printr launches on Robinhood the instant they go live.
Maestro now supports Printr launches on Robinhood chain Trade @printr tokens on RH the moment they launch. Print more by staying ahead with Maestro. 🤖🖨️
13
4
2
38
14,647
Printr → Robinhood → Banana Gun 🍌
Printr launches on Robinhood are now live on Banana Gun. Trade @printr tokens from the moment they launch with market buys, limit orders, copy trading, and fast execution.
6
2
54
10,115
Printr retweeted
Did you know that you can set both the graduation market cap & the liquidity on your bonding curve when launching on @printr? Quick guide on the custom bonding curve 👇 Graduation MCAP: Set your graduation market cap as low or high as you like Liquidity/MCAP slider: How much supply gets sold on the curve vs. paired with ETH post-graduation Example below 👇 Starting MCAP: $3,675 → Graduation MCAP: $30,000, with 65% of the supply sold on the bonding curve; and 35% added to the LP post-graduation The result? - Full control over your token's launch dynamics - Tune for cheaper entry or deeper post-grad liquidity - Design tokenomics that actually fit your project
14
8
28
2,981
Today, Printr goes live on Robinhood chain. Launch a token on @RobinhoodCrypto’s new L2 in just a few clicks. All tokens graduate to @Uniswap liquidity pools.
43
15
7
125
30,707
You can swap from any supported asset to any memes on Robinhood in one click. Cross-chain swaps powered by @relayprotocol Millions of Robinhood users. One launchpad. Go print → app.printr.money
3
10
3,591
Stablecoin pairs are now live across every EVM chain on Printr. Launch your token paired with USDC, USDT or USD1 instead of the gas token. ✅ Price quoted in dollars ($) ✅ Less exposure to macro swings ✅ Best suited for utility and longer-term tokens Pick your pair.
13
6
52
8,745
Launch now now: app.printr.money
1
1
13
2,433
Current meta: Send supply to KOLs, hope they don't dump Did you know on printr you can send a staked position No instant dump, they earn from fees
Introducing Send a Stake A new way to send token supply to KOLs, contributors, and bagworkers, without the instant dump. Recipients earn fees while their allocation is locked. Once the lock ends, they own the supply.
23
8
4
65
13,600
boss told me to check out some stables am i doing it right?
11
3
1
31
6,536
MoonRush x Printr is live Every Printr token now hits MoonRush, and trading there is FREE for one week. LFP
MoonRush x @printr - we’re live! All Printr tokens will hit MoonRush, and trading is FREE (0% fees) for 1 week. Printr is the most configurable launchpad in crypto, giving creators full control over how their tokens launch across multiple chains. Check it out 👉 app.printr.money/
10
10
60
11,984
Printr retweeted
New token launches on @XLayerOfficial just got more accessible. Our @printr integration lets you discover and trade newly launched X Layer tokens directly in-app, with prices aggregated across 500+ DEXs.
23
21
2
110
26,775
Printr is now live on @XLayerOfficial Launch, trade, and stake tokens on the chain powered by @okx Supported pairs: $OKB and $USDG
36
15
9
102
39,216
For a limited time only, all prints, trades and stakes on @XLayerOfficial earn points - 500 points per token created - 2 points per $1 traded - 10 points per $1 staked x staking duration Start printing now: app.printr.money
1
1
13
2,957
Printr is now live via @base MCP. 🖨️ Your agent's new gateway to printing tokens on Base. Describe a token. It launches it.
New skills just dropped on Base MCP 13 apps, and now more ways for agents to: → Transact → Trade → Lend → Mint → Buy All onchain, all on Base
14
9
5
58
15,982
The agent does the whole thing: name, ticker, AI-generated avatar, initial buy, deployment. All from a single message. Keys never touch the AI. Zero config, no API key. npx @printr/mcp setup and you're ready to deploy.
3
11
1,788