うどん県で「tac-lab」および「フェイクフード&ミニチュアフードさくらや」として活動中のtac-labのtacです。シルバニアやフィギュアの食器を作っています。 機構・基板・FW・SW各種設計コーティング。はてはSV構築からNWまで幅広く対応可能です。とりあえず何屋だろう。
うどん県
Joined October 2020
- Tweets19.1K
- Following2.4K
- Followers1.9K
- Likes30.1K
Pinned Tweet
x コミュニティ廃止に伴いチャットに移行中です。手動承認しかないので気づき次第対応します。
line のオープンチャットとかいどう先の希望ってありますか？
teapawt.net/i/chat/group_join/g204…
場外乱闘にふさわしい、、
フレーム短縮してXLのベッドタイルを使用した「PRUSA i3 mini」を作りました😁
詳しくは下へ。
@Prusa3D_JP @tommy_prusa3d
#PRUSA mk3s+
#3Dプリンター
tac-lab@さくらや製造部 retweeted
フレーム短縮してXLのベッドタイルを使用した「PRUSA i3 mini」を作りました😁
詳しくは下へ。
@Prusa3D_JP @tommy_prusa3d
#PRUSA mk3s+
#3Dプリンター
tac-lab@さくらや製造部 retweeted
ツルチェンにばかり目がいってたけど、H3CのX軸ってリニアレールやめたんだ。
大型機にとって特に重要なパーツをコストカットで妥協するとは考えづらいし、BambuLab的にはスチールロッドの方が良いという考えなのかな🤔
メーカーリコール対応すごいなぁ、
この辺りの決断が早い。
Dear customers,
We’ve heard from a number of you recently that the gears on your AMS 2 Pro Feeder Units are wearing out faster than expected.
After digging into the issue, we found that a batch of AMS 2 Pro Feeder Units made between May and July 2026 didn’t get enough grease coverage during production, which is causing this faster wear. The good news is there’s no such issue with units we’re selling on official stores right now.
We know this is frustrating, and we’re so sorry for the hassle this has caused you. We can’t say for sure exactly how many units are affected, so we’re making it right for everyone in this batch to make sure no one gets stuck with a problem down the line. Here’s what we’re doing for you:
- 4 brand new AMS 2 Pro Feeder Units, on us. We’re covering all the cost of the parts and shipping, so you don’t have to pay a cent. Right now we’re getting all the parts prepped, so the new units will be sent out in batches over the next 3-5 weeks. If your current feeder is still working fine, you can keep using it until the new ones arrive, then check how worn your old one is before you decide to swap it out.
- $20 discount code for your next Bambu Lab purchase. The exact amount will match the equivalent value for your local currency.
- Extended warranty for your new feeders. When you get the new units, your 3-month warranty will start fresh from the day you receive them. Swapping out the feeders yourself won’t affect the warranty on the rest of your AMS, either.
We’ve already sent a message with step-by-step replacement instructions to everyone in this batch through MakerWorld and Bambu Handy. If you didn’t get that message but think your AMS 2 Pro might be part of this group, you can check the wiki guide to confirm.
We’re really sorry again for the inconvenience this has caused you, and we’re working hard to make sure this kind of issue never happens again. If you have any questions, please reach out to our support team and we’ll help you sort it out.
For full details and information on the service program, please refer to the Bambu Lab Wiki: wiki.bambulab.com/en/ams-2-p…
Thanks for being patient with us!
Bambu Lab Team
tac-lab@さくらや製造部 retweeted
Dear customers,
We’ve heard from a number of you recently that the gears on your AMS 2 Pro Feeder Units are wearing out faster than expected.
After digging into the issue, we found that a batch of AMS 2 Pro Feeder Units made between May and July 2026 didn’t get enough grease coverage during production, which is causing this faster wear. The good news is there’s no such issue with units we’re selling on official stores right now.
We know this is frustrating, and we’re so sorry for the hassle this has caused you. We can’t say for sure exactly how many units are affected, so we’re making it right for everyone in this batch to make sure no one gets stuck with a problem down the line. Here’s what we’re doing for you:
- 4 brand new AMS 2 Pro Feeder Units, on us. We’re covering all the cost of the parts and shipping, so you don’t have to pay a cent. Right now we’re getting all the parts prepped, so the new units will be sent out in batches over the next 3-5 weeks. If your current feeder is still working fine, you can keep using it until the new ones arrive, then check how worn your old one is before you decide to swap it out.
- $20 discount code for your next Bambu Lab purchase. The exact amount will match the equivalent value for your local currency.
- Extended warranty for your new feeders. When you get the new units, your 3-month warranty will start fresh from the day you receive them. Swapping out the feeders yourself won’t affect the warranty on the rest of your AMS, either.
We’ve already sent a message with step-by-step replacement instructions to everyone in this batch through MakerWorld and Bambu Handy. If you didn’t get that message but think your AMS 2 Pro might be part of this group, you can check the wiki guide to confirm.
We’re really sorry again for the inconvenience this has caused you, and we’re working hard to make sure this kind of issue never happens again. If you have any questions, please reach out to our support team and we’ll help you sort it out.
For full details and information on the service program, please refer to the Bambu Lab Wiki: wiki.bambulab.com/en/ams-2-p…
Thanks for being patient with us!
Bambu Lab Team
tac-lab@さくらや製造部 retweeted
4色3Dプリンター「AD5X」の純正システムを置き換えるOS「Kiln OS」 fabscene.com/new/make/flashf…
tac-lab@さくらや製造部 retweeted
おはようございます(*ฅ´ω`ฅ*)
Bambu Labの新製品ツールチェンジャー3Dプリンター「H3C」が正式に公表されました！
詳細は日本時間11月4日(水)午前11:00公開♪
Bambu Labが作るツールチェンジャー機は新たなゲームチェンジャー誕生となるのか…
期待が膨らみますฅ(´ω` ฅ)
今日のフィラメント
DEEPLEEさんからPLA+の複数パックが新着です。
円弱いはずなのに余裕でグラム単価が2円切ってきてるって恐ろしい時代
#3Dプリンター #フィラメント #AD tac-lab.tech/palette/?mfg=11…
tac-lab@さくらや製造部 retweeted
／
秋のプレゼントキャンペーン
『ラズパイ4』が抽選で【3名様】に当たる🎁
＼
【参加方法】
1️⃣@MouserElecJapan をフォロー
2️⃣この投稿をリポスト
【応募締め切り】
11月3日（火）23:59まで
【応募資格】
・日本在住かつプレゼントを受け取れる方
・Xの公開アカウントをお持ちの方
【当選報告】
当選者の方にのみXのチャットにてご連絡
※チャットの開放をお願いいたします。
【製品詳細】
URL：mouser.jp/ja/ProductDetail/R…
※当プレゼントキャンペーンにおける景品は、箱にダメージがある場合がありますが未使用で、保証対象外となります。
【応募規約】
URL：mouser.bynder.com/asset/d7f2…
tac-lab@さくらや製造部 retweeted
大切な思い出を、もっと安心な場所へ。
UGREEN NASとWD Red® Plus HDDのセットを抽選で2名様にプレゼント！
データの保存・バックアップに、NASを始めてみませんか？
@ugreenjapan と @WD_JPN をフォロー＆対象投稿をリポストで応募完了。
10月31日（土）23:59まで。賞品・応募詳細は投稿をチェック！
なんか本当に駆逐して来てるね。