Turn a Raspberry Pi Pico W into a driverless USB WiFi adapter @Raspberry_Pi blog.adafruit.com/2026/07/15…

The RP2040 Feather with USB Host lets us use Intellikeys with an iPad the Intellikeys is a popular accessibility device with custom overlays, that is no longer supported. even though it has a USB plug it doesn't work like many USB devices: it doesn't enumerate as an HID keyboard, instead it downloads the firmware from the computer driver! that means it'll never work with many modern devices ike chromebooks or iPads...unless you've got a specialized device like the RP2040 Feather with two USB ports! we've loaded Thach's Intellikeys translator (github.com/adafruit/Adafruit…) arduino sketch and it even does overlay detection so that when we switch out the paper it will enumerate as a different HID device. the code and hardware is all open source, so it can be maintained and improved for a very long time.

Saturday night

Using USB Host in Arduino and RP2040 using TinyUSB #PiDay #Arduino #QTPy @HisashiKato @Raspberry_Pi blog.adafruit.com/2023/03/14…

One step closer to Metro M7 feat. iMX RT1011 and ESP32! The first board of a new chip series is always the toughest because we have to figure out all the gotchas and testing techniques.

rp2040 programming an rp2040 ~ flash inception we crank out a lot of @Raspberry_Pi rp2040 microcontroller boards and so we have to be able to program them very fast and very reliably. historically we used a teensy 3.6 to run our programmer+tester 'brains'

Breaking Secure Boot on Google Nest Hub to run Ubuntu #TinyUSB #Nest adafru.it/-Ei

using tinyusb and arduino to make a USB mass storage floppy 💾 drive -we got on-the-fly mfm decoding working so we have fluxes converted to bytes, and all the sectors are verifying right. wouldn't it be neat if we could use tinyusb's mass-storage class to make a usb floppy drive?