Tobias Müller (@twamueller) header
Tobias Müller (@twamueller) profile picture

maker, hacker, nerd, developer, e-cyclist, photographer, physicist

Germany
Joined August 2009
Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)Photo by Tobias Müller (@twamueller)
Tobias Müller retweeted
A Lattice ECP5 based open source debugger for Cortex M class micros. Making use of LiteX, LUNA HS USB (stack) and LiteHyperbus! github.com/orbcode/orbtrace orbcode.org/orbtrace-mini/
4
19
4
202
#3Dprinting and #woodworking are two perfectly complementary hobbies. Mounting RAMPA inserts perfectly located and align has never been easier.
1
6
First successful day of video calls using my home build USB audio mixer (twam.info/general/building-a…).
2
Build an IEC-62056-21 compatible optical USB probe to read out power meters (github.com/twam/IEC-62056-21…). Total cost per probe (when building 20 probes) and a self printed case is < 10€. PCBs can be ordered assembled from jlcpcb.com/DDE.
3
1
17
Tobias Müller retweeted
Wir haben neulich Schnelltests gekauft und erst später festgestellt, dass deren Erkennungsraten extrem niedrig sind. Darüber haben wir uns so sehr geärgert, dass wir eine praktische Einkaufshilfe gebaut haben: zerforschung.org/posts/schne…
208
2,005
343
4,488
Finally received my ButterStick (github.com/butterstick-fpga/…) from ⁦⁦@GregDavill⁩’s GroupGets campaign. Really love the attention to detail, especially in the LED chaser light.
18
Tried out @JLCPCB's new 3D printing service. First impressions are very positive. White is 9000E Resin and grey/black are PA12-HP Nylon. Only the Pi tower is not perfectly circular, but I was pre-warned by technician that will be tricky to print. jlcpcb.com/DDE
3
3
17
On the grey PA12-HP Nylon prints some structure is visible. The black PA12-HP show some roughness (looks very good), but no real horizontal structures/lines. The white 9000E Resin is very smooth. Couldn't test 8000E Resin as not printing capacity was available.
1
6
I made it before ⁦@elonmusk⁩! 🎉🎉🎉 And thanks to ⁦@BoscheBikeUS⁩ even full electric! 🚵‍♂️ – at Mars, France
3
The LUNA @crowd_supply campaign is now active! 🎉 Please check it out and support us if you can. crowdsupply.com/great-scott-…
23
134
36
458
Some heavy thunderstorm with hail in #Tuebingen
3
Received the #frontpanel for my current project from #schaefferag and really like how it came out!
1
1
7
Retrofitted my DBX 286s Mic Preamp with a toroidal transformer to get rid of the humming of the original transformer. Files can be found at github.com/twam/Transformer-…
4
7
Sounds legit 🤣🤣🤣
Looks like the power supply doesn’t like shorting the +15V and -15V output 🙈
2
Hey⁩ ⁦@DanielBogdanoff & ⁦@Keysight⁩, what about supplying this with your scope probes? I should have modded my aligator clips like this years ago. Makes quick measurements so much easier.
1
It‘s alive! Reverse engineering the Colorlight i9 „FPGA module“.
1
2
7
Got my custom USB-C Pmod using an USB3320 ULPI PHY to work with github.com/greatscottgadgets….
3
1
6
Hey @DanielBogdanoff. I just received an E36234A as a replacement for my old E3633A/E3632A. I really enjoy how much quieter it is 👍. However I cannot find any way to configure it to start up with the last set voltages/currents (only fixed values). Is this really not possible?
1