Tim Abraham (@Timmit99) header
Tim Abraham (@Timmit99) profile picture

Voron Design admin, Mechanical Engineer, Electrical tinkerer, breaking of things. Dropped the ball, once.

Massachusetts, USA
Joined August 2009
Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)Photo by Tim Abraham (@Timmit99)
Tim Abraham retweeted
VORON DESIGN is pleased to release not one, not two, but three things: Today, Not Soon™ 🎉 - StealthBurner Update with ClockWork 2.5: github.com/VoronDesign/voron… - Voron Chariot X-Carriage: github.com/VoronDesign/voron… - Voron DownDraft Toolhead: github.com/VoronDesign/voron… Info Below!
5
33
1
174
6,285
Replying to @CanuckCreator
Just turn it into some kind of storage for specialty filaments! Seal the inside, add desiccant or some other environmental control system and have a shell with a payload of CF-Nylon, or something! Project for the channel, and viable storage! Win-Win
1
2
61
Tim Abraham retweeted
Trident R2 had been released! With a reworked XY and Z motion system, CAD, STLs, panel DXFs and manual are on VORON Github. github.com/VoronDesign/Voron… Thanks to everyone involved in the design, build, testing, and documentation for this update! Change highlights below!
9
41
4
137
8,692
Well that's new @Voron_Design
7
7
1
67
8,609
Tim Abraham retweeted
19 years ago today... "Here Comes the Pizza" 🤣🍕
33
139
25
899
78,126
Happy “Flying Pizza” Day if you’re observing it… 19 years ago today. April 16, 2007, Marathon Day, a fan at Fenway Park chucked a slice of 🍕 at another fan. It was a custom job.
68
611
118
4,256
429,043
I got the same thing and was going to reach out. Good to know it's legitimate!
1
3
24
The 3d printing community has some of the best, most creative model designers out there, and many of them give away their models for free Dont support slop
Where 3D printing meets AI, possibilities become limitless.
5
9
119
4,440
I've been using only Jessie PLA for the MK4S's at work. Parts come out fantastic and repeatable every time! Hands down the most consistent filament with fantastic color options and quick delivery! As long as everything continues going well, it will be the only filament we use!
3
242
Replying to @greghuber
My concern is what happens to the machine if the site goes down. My town has 2 for the library makerspace and i fear that if they go down they wont be replaced by anything that has the level of control and ease of use that Glowforge has. "Click button, get part" is key for them.
1
2
18
Replying to @greghuber
I'll take the Glowforge if you get a P3 before the Glowforge dies 😉
1
1
31
uninstall and reinstall the ENTIRE package! It can take hours and it is the single most frustrating software to get working. Once its working, **I LOVE it**, I've been using it for years and while it has its quirks, i know where everything is and can make things fast and simply
1
2
73
Been using @SOLIDWORKS for over 20 years, Maker Edition / 3D Experience installation and updating is the single WORST expereience i've ever dealt with.. I'd happily pay $500-$1000 for an offline, no updates package right now... Updates ALWAYS hand or fail and then i have to...
2
1
4
199
Coworkers asked me to print the enclosure files for his AD5X. Only available in a single .zio with a single 3mf file that creates new profiles, printer, and slicing settings. So annoying to have to switch everything back. Just give me the files AND the 3MF... don't just use 3MF..
1
27
Replying to @JoshMurrah
Would you look back when it's done and be OK even if its not perfect? Is it something you could easily replace in the future if you DON'T like it? If there's a No to either one, just bite the bullet and do the resin print now, otherwise just wait and see how it comes out!
1
1
109
Replying to @DrinkAriZona
Best drinks to bring onto the golf course! #AriZonaIsTheOnlyLemonadeThatMatters
2
19
Let me see if I have any LEGO pieces that color because I have both over the Jesse PLA's above
2
52
Sang along to every single song tonight and while Chester's screams will still be the best versions, I'm excited for the new sound and songs!
80